Merge pull request #1558 from netbox-community/develop

Version 3.4.2

.dockerignore

@@ -1,10 +1,13 @@
-.git
-.github
-.travis.yml
+.git*
 *.md
-env
 build*
-docker-compose.override.yml
+docker-compose*
+env
+test-configuration
 .netbox/.git*
-.netbox/.travis.yml
+.netbox/.pre-commit-config.yaml
+.netbox/.readthedocs.yaml
+.netbox/.tx
+.netbox/contrib
 .netbox/scripts
+.netbox/upgrade.sh

.editorconfig

@@ -9,3 +9,6 @@ indent_size = 2
 
 [*.py]
 indent_size = 4
+
+[VERSION]
+insert_final_newline = false

.editorconfig-checker.json

@@ -2,17 +2,12 @@
   "Verbose": false,
   "Debug": false,
   "IgnoreDefaults": false,
-  "SpacesAftertabs": false,
+  "SpacesAfterTabs": false,
   "NoColor": false,
-  "Exclude": [
-    "LICENSE",
-    "\\.initializers",
-    "\\.vscode"
-  ],
+  "Exclude": ["LICENSE", "\\.initializers", "\\.vscode"],
   "AllowedContentTypes": [],
   "PassedFiles": [],
   "Disable": {
-    // set these options to true to disable specific checks
     "EndOfLine": false,
     "Indentation": false,
     "InsertFinalNewline": false,

.github/FUNDING.yml

@@ -1,8 +1,8 @@
 # These are supported funding model platforms
 
 github: # Replace with up to 4 GitHub Sponsors-enabled usernames e.g., [user1, user2]
-- cimnine
-- tobiasge
+  - cimnine
+  - tobiasge
 patreon: # Replace with a single Patreon username
 open_collective: # Replace with a single Open Collective username
 ko_fi: # Replace with a single Ko-fi username

.github/ISSUE_TEMPLATE/bug_report.yml

@@ -1,7 +1,7 @@
 name: Bug report
 description: Create a report about a malfunction of the Docker setup
 body:
-- type: markdown
+  - type: markdown
     attributes:
       value: |
         Please only raise an issue if you're certain that you've found a bug.
@@ -28,7 +28,7 @@ body:
 
         Please don't open an issue to open a PR.
         Just submit the PR, that's good enough.
-- type: textarea
+  - type: textarea
     id: current-behavior
     attributes:
       label: Current Behavior
@@ -36,7 +36,7 @@ body:
       placeholder: I tried to … by doing …, but it …
     validations:
       required: true
-- type: textarea
+  - type: textarea
     id: expected-behavior
     attributes:
       label: Expected Behavior
@@ -44,15 +44,15 @@ body:
       placeholder: I expected that … when I do …
     validations:
       required: true
-- type: input
+  - type: input
     id: docker-compose-version
     attributes:
       label: Docker Compose Version
-    description: Please paste the output of `docker-compose version`
+      description: Please paste the output of `docker-compose version` (or `docker compose version`)
       placeholder: Docker Compose version vX.Y.Z
     validations:
       required: true
-- type: textarea
+  - type: textarea
     id: docker-version
     attributes:
       label: Docker Version
@@ -90,14 +90,14 @@ body:
           GitCommit:        de40ad0
     validations:
       required: true
-- type: input
+  - type: input
     id: git-rev
     attributes:
       label: The git Revision
       description: Please paste the output of `git rev-parse HEAD`
     validations:
       required: true
-- type: textarea
+  - type: textarea
     id: git-status
     attributes:
       label: The git Status
@@ -108,7 +108,7 @@ body:
         nothing to commit, working tree clean
     validations:
       required: true
-- type: input
+  - type: input
     id: run-command
     attributes:
       label: Startup Command
@@ -116,7 +116,7 @@ body:
       placeholder: docker compose up
     validations:
       required: true
-- type: textarea
+  - type: textarea
     id: netbox-logs
     attributes:
       label: NetBox Logs
@@ -132,14 +132,13 @@ body:
         ...
     validations:
       required: true
-- type: textarea
+  - type: textarea
     id: docker-compose-override-yml
     attributes:
       label: Content of docker-compose.override.yml
       description: Please paste the output of `cat docker-compose.override.yml`
       render: yaml
       placeholder: |
-      version: '3.4'
         services:
           netbox:
             ports:

.github/ISSUE_TEMPLATE/config.yml

@@ -6,7 +6,7 @@ contact_links:
 
   - name: Chat
     url: https://join.slack.com/t/netdev-community/shared_invite/zt-mtts8g0n-Sm6Wutn62q_M4OdsaIycrQ
-    about: 'Usually the quickest way to seek help with small issues is to join our #netbox-docker Slack channel.'
+    about: "Usually the quickest way to seek help with small issues is to join our #netbox-docker Slack channel."
 
   - name: Community Wiki
     url: https://github.com/netbox-community/netbox-docker/wiki

.github/ISSUE_TEMPLATE/feature_request.yml

@@ -1,7 +1,7 @@
 name: Feature or Change Request
 description: Request a new feature or a change of the current behavior
 body:
-- type: markdown
+  - type: markdown
     attributes:
       value: |
         This issue type is to propose new features for the Docker setup.
@@ -30,7 +30,7 @@ body:
 
         Please don't open an issue to open a PR.
         Just submit the PR, that's good enough.
-- type: textarea
+  - type: textarea
     id: desired-behavior
     attributes:
       label: Desired Behavior
@@ -38,7 +38,7 @@ body:
       placeholder: To me, it would be useful, if … because …
     validations:
       required: true
-- type: textarea
+  - type: textarea
     id: contrast-to-current
     attributes:
       label: Contrast to Current Behavior
@@ -46,7 +46,7 @@ body:
       placeholder: The current behavior is …, but this lacks …
     validations:
       required: true
-- type: textarea
+  - type: textarea
     id: required-changes
     attributes:
       label: Required Changes
@@ -54,10 +54,10 @@ body:
       placeholder: I suggest to change the file …
     validations:
       required: false
-- type: textarea
+  - type: textarea
     id: discussion
     attributes:
-    label: 'Discussion: Benefits and Drawbacks'
+      label: "Discussion: Benefits and Drawbacks"
       description: |
         Please make your case here:
         - Why do you think this project and the community will benefit from your suggestion?

.github/pull_request_template.md

@@ -80,6 +80,6 @@ into the release notes.
 Please put an x into the brackets (like `[x]`) if you've completed that task.
 -->
 
-* [ ] I have read the comments and followed the PR template.
-* [ ] I have explained my PR according to the information in the comments.
-* [ ] My PR targets the `develop` branch.
+- [ ] I have read the comments and followed the PR template.
+- [ ] I have explained my PR according to the information in the comments.
+- [ ] My PR targets the `develop` branch.

.github/workflows/push.yml

@@ -1,66 +1,102 @@
+---
 name: push
 
 on:
   push:
     branches-ignore:
       - release
+      - renovate/**
   pull_request:
     branches-ignore:
       - release
 
+concurrency:
+  group: ${{ github.workflow }}-${{ github.event.pull_request.number || github.ref }}
+  cancel-in-progress: true
+
 jobs:
   lint:
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-24.04
     name: Checks syntax of our code
+    permissions:
+      contents: read
+      packages: read
+      statuses: write
     steps:
-    - uses: actions/checkout@v3
+      - uses: actions/checkout@v5
         with:
-        # Full git history is needed to get a proper list of changed files within `super-linter`
+          # Full git history is needed to get a proper
+          # list of changed files within `super-linter`
           fetch-depth: 0
-    - uses: actions/setup-python@v4
-      with:
-        python-version: '3.9'
       - name: Lint Code Base
-      uses: github/super-linter@v4
+        uses: super-linter/super-linter@v8
         env:
           DEFAULT_BRANCH: develop
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
           SUPPRESS_POSSUM: true
           LINTER_RULES_PATH: /
           VALIDATE_ALL_CODEBASE: false
+          VALIDATE_BIOME_FORMAT: false
+          VALIDATE_CHECKOV: false
           VALIDATE_DOCKERFILE: false
+          VALIDATE_GITHUB_ACTIONS_ZIZMOR: false
+          VALIDATE_GITLEAKS: false
+          VALIDATE_JSCPD: false
+          VALIDATE_TRIVY: false
           FILTER_REGEX_EXCLUDE: (.*/)?(LICENSE|configuration/.*)
-
-        EDITORCONFIG_FILE_NAME: .ecrc
+          EDITORCONFIG_FILE_NAME: .editorconfig-checker.json
           DOCKERFILE_HADOLINT_FILE_NAME: .hadolint.yaml
           MARKDOWN_CONFIG_FILE: .markdown-lint.yml
           PYTHON_BLACK_CONFIG_FILE: pyproject.toml
           PYTHON_FLAKE8_CONFIG_FILE: .flake8
           PYTHON_ISORT_CONFIG_FILE: pyproject.toml
+          YAML_CONFIG_FILE: .yamllint.yaml
   build:
-    continue-on-error: ${{ matrix.docker_from == 'alpine:edge' }}
+    continue-on-error: ${{ matrix.build_cmd != './build-latest.sh' }}
     strategy:
       matrix:
         build_cmd:
           - ./build-latest.sh
           - PRERELEASE=true ./build-latest.sh
           - ./build.sh feature
-        - ./build.sh develop
-        docker_from:
-        - '' # use the default of the build script
+          - ./build.sh main
+        os:
+          - ubuntu-24.04
+          - ubuntu-24.04-arm
       fail-fast: false
-    runs-on: ubuntu-latest
+    env:
+      GH_ACTION: enable
+      GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+      IMAGE_NAMES: docker.io/netboxcommunity/netbox
+    runs-on: ${{ matrix.os }}
     name: Builds new NetBox Docker Images
     steps:
       - id: git-checkout
         name: Checkout
-      uses: actions/checkout@v3
+        uses: actions/checkout@v5
+      - id: buildx-setup
+        name: Set up Docker Buildx
+        uses: docker/setup-buildx-action@v3
+      - id: arm-install-skopeo
+        name: Install 'skopeo' on ARM64
+        if: matrix.os == 'ubuntu-24.04-arm'
+        run: |
+          sudo apt-get install -y skopeo
+      - id: arm-buildx-platform
+        name: Set BUILDX_PLATFORM to ARM64
+        if: matrix.os == 'ubuntu-24.04-arm'
+        run: |
+          echo "BUILDX_PLATFORM=linux/arm64" >>"${GITHUB_ENV}"
       - id: docker-build
-      name: Build the image from '${{ matrix.docker_from }}' with '${{ matrix.build_cmd }}'
+        name: Build the image for '${{ matrix.os }}' with '${{ matrix.build_cmd }}'
         run: ${{ matrix.build_cmd }}
         env:
-        DOCKER_FROM: ${{ matrix.docker_from }}
-        GH_ACTION: enable
+          BUILDX_BUILDER_NAME: ${{ steps.buildx-setup.outputs.name }}
+      - id: arm-time-limit
+        name: Set Netbox container start_period higher on ARM64
+        if: matrix.os == 'ubuntu-24.04-arm'
+        run: |
+          echo "NETBOX_START_PERIOD=240s" >>"${GITHUB_ENV}"
       - id: docker-test
         name: Test the image
         run: IMAGE="${FINAL_DOCKER_TAG}" ./test.sh

.github/workflows/release.yml

@@ -1,3 +1,4 @@
+---
 name: release
 
 on:
@@ -5,83 +6,83 @@ on:
     types:
       - published
   schedule:
-    - cron: '45 5 * * *'
+    - cron: "45 5 * * *"
+  workflow_dispatch:
 
 jobs:
   build:
     strategy:
       matrix:
-        build_cmd:
-        - ./build-latest.sh
-        - PRERELEASE=true ./build-latest.sh
-        - ./build.sh feature
-        - ./build.sh develop
+        build:
+          - { "cmd": "./build-latest.sh", "branch": "release" }
+          - { "cmd": "./build.sh main", "branch": "release" }
+          # Build pre release images from our develop branch
+          # This is used to test the latest changes before they are merged into the main branch
+          - { "cmd": "PRERELEASE=true ./build-latest.sh", "branch": "develop" }
+          - { "cmd": "./build.sh feature", "branch": "develop" }
+        platform:
+          - linux/amd64,linux/arm64
       fail-fast: false
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-24.04
     name: Builds new NetBox Docker Images
     env:
       GH_ACTION: enable
+      GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+      IMAGE_NAMES: docker.io/netboxcommunity/netbox quay.io/netboxcommunity/netbox ghcr.io/netbox-community/netbox
     steps:
-    -
+      - id: source-checkout
         name: Checkout
-      uses: actions/checkout@v3
-    -
+        uses: actions/checkout@v5
+        with:
+          ref: ${{ matrix.build.branch }}
+      - id: set-netbox-docker-version
         name: Get Version of NetBox Docker
-      run: |
-        echo "::set-output name=version::$(cat VERSION)"
+        run: echo "version=$(cat VERSION)" >>"$GITHUB_OUTPUT"
         shell: bash
-    -
-      id: docker-build
-      name: Build the image with '${{ matrix.build_cmd }}'
-      run: ${{ matrix.build_cmd }}
-    -
-      name: Test the image
-      run: IMAGE="${FINAL_DOCKER_TAG}" ./test.sh
-      if: steps.docker-build.outputs.skipped != 'true'
-
+      - id: check-build-needed
+        name: Check if the build is needed for '${{ matrix.build.cmd }}'
+        env:
+          CHECK_ONLY: "true"
+        run: ${{ matrix.build.cmd }}
       # docker.io
-    -
+      - id: docker-io-login
         name: Login to docker.io
-      uses: docker/login-action@v2
+        uses: docker/login-action@v3
         with:
           registry: docker.io
           username: ${{ secrets.dockerhub_username }}
           password: ${{ secrets.dockerhub_password }}
-      if: steps.docker-build.outputs.skipped != 'true'
-    -
-      name: Push the image to docker.io
-      run: ${{ matrix.build_cmd }} --push-only
-      if: steps.docker-build.outputs.skipped != 'true'
-
+        if: steps.check-build-needed.outputs.skipped != 'true'
+      - id: buildx-setup
+        name: Set up Docker Buildx
+        uses: docker/setup-buildx-action@v3
+        with:
+          version: "lab:latest"
+          driver: cloud
+          endpoint: "netboxcommunity/netbox-default"
+        if: steps.check-build-needed.outputs.skipped != 'true'
       # quay.io
-    -
+      - id: quay-io-login
         name: Login to Quay.io
-      uses: docker/login-action@v2
+        uses: docker/login-action@v3
         with:
           registry: quay.io
           username: ${{ secrets.quayio_username }}
           password: ${{ secrets.quayio_password }}
-      if: steps.docker-build.outputs.skipped != 'true'
-    -
-      name: Build and push the image with '${{ matrix.build_cmd }}'
-      run: ${{ matrix.build_cmd }} --push
-      env:
-        DOCKER_REGISTRY: quay.io
-      if: steps.docker-build.outputs.skipped != 'true'
-
+        if: steps.check-build-needed.outputs.skipped != 'true'
       # ghcr.io
-    -
+      - id: ghcr-io-login
         name: Login to GitHub Container Registry
-      uses: docker/login-action@v2
+        uses: docker/login-action@v3
         with:
           registry: ghcr.io
           username: ${{ github.repository_owner }}
           password: ${{ secrets.GITHUB_TOKEN }}
-      if: steps.docker-build.outputs.skipped != 'true'
-    -
-      name: Build and push the image with '${{ matrix.build_cmd }}'
-      run: ${{ matrix.build_cmd }} --push
+        if: steps.check-build-needed.outputs.skipped != 'true'
+      - id: build-and-push
+        name: Push the image
+        run: ${{ matrix.build.cmd }} --push
+        if: steps.check-build-needed.outputs.skipped != 'true'
         env:
-        DOCKER_REGISTRY: ghcr.io
-        DOCKER_ORG: netbox-community
-      if: steps.docker-build.outputs.skipped != 'true'
+          BUILDX_PLATFORM: ${{ matrix.platform }}
+          BUILDX_BUILDER_NAME: ${{ steps.buildx-setup.outputs.name }}

.gitignore

@@ -1,6 +1,6 @@
 *.sql.gz
 .netbox
-.initializers
+.python-version
 docker-compose.override.yml
 *.pem
 configuration/*
@@ -11,5 +11,4 @@ configuration/ldap/*
 !configuration/ldap/ldap_config.py
 !configuration/logging.py
 !configuration/plugins.py
-prometheus.yml
 super-linter.log

.yamllint.yaml

@@ -0,0 +1,4 @@
+---
+rules:
+  line-length:
+    max: 160

Dockerfile

@@ -1,6 +1,7 @@
 ARG FROM
-FROM ${FROM} as builder
+FROM ${FROM} AS builder
 
+COPY --from=ghcr.io/astral-sh/uv:0.9 /uv /usr/local/bin/
 RUN export DEBIAN_FRONTEND=noninteractive \
     && apt-get update -qq \
     && apt-get upgrade \
@@ -13,18 +14,28 @@ RUN export DEBIAN_FRONTEND=noninteractive \
       libpq-dev \
       libsasl2-dev \
       libssl-dev \
+      libxml2-dev \
+      libxmlsec1 \
+      libxmlsec1-dev \
+      libxmlsec1-openssl \
+      libxslt-dev \
+      pkg-config \
       python3-dev \
-      python3-pip \
-      python3-venv \
-    && python3 -m venv /opt/netbox/venv \
-    && /opt/netbox/venv/bin/python3 -m pip install --upgrade \
-      pip \
-      setuptools \
-      wheel
+    && /usr/local/bin/uv venv /opt/netbox/venv
 
 ARG NETBOX_PATH
 COPY ${NETBOX_PATH}/requirements.txt requirements-container.txt /
-RUN /opt/netbox/venv/bin/pip install \
+ENV VIRTUAL_ENV=/opt/netbox/venv
+RUN \
+    # Gunicorn is not needed because we use Nginx Unit
+    sed -i -e '/gunicorn/d' /requirements.txt && \
+    # We need 'social-auth-core[all]' in the Docker image. But if we put it in our own requirements-container.txt
+    # we have potential version conflicts and the build will fail.
+    # That's why we just replace it in the original requirements.txt.
+    sed -i -e 's/social-auth-core/social-auth-core\[all\]/g' /requirements.txt && \
+    # The same is true for 'django-storages'
+    sed -i -e 's/django-storages/django-storages\[azure,boto3,dropbox,google,libcloud,sftp\]/g' /requirements.txt && \
+    /usr/local/bin/uv pip install \
       -r /requirements.txt \
       -r /requirements-container.txt
 
@@ -33,32 +44,33 @@ RUN /opt/netbox/venv/bin/pip install \
 ###
 
 ARG FROM
-FROM ${FROM} as main
+FROM ${FROM} AS main
 
+COPY docker/unit.list /etc/apt/sources.list.d/unit.list
+ADD --chmod=444 --chown=0:0 https://unit.nginx.org/keys/nginx-keyring.gpg /usr/share/keyrings/nginx-keyring.gpg
 RUN export DEBIAN_FRONTEND=noninteractive \
     && apt-get update -qq \
     && apt-get upgrade \
       --yes -qq --no-install-recommends \
     && apt-get install \
       --yes -qq --no-install-recommends \
+      bzip2 \
       ca-certificates \
       curl \
+      libldap-common \
       libpq5 \
+      libxmlsec1-openssl \
+      openssh-client \
       openssl \
       python3 \
-      python3-distutils \
       tini \
-    && curl -sL https://nginx.org/keys/nginx_signing.key \
-      > /etc/apt/trusted.gpg.d/nginx.asc && \
-    echo "deb https://packages.nginx.org/unit/debian/ bullseye unit" \
-      > /etc/apt/sources.list.d/unit.list \
-    && apt-get update -qq \
-    && apt-get install \
-      --yes -qq --no-install-recommends \
-      unit=1.27.0-1~bullseye \
-      unit-python3.9=1.27.0-1~bullseye \
+      unit-python3.12=1.34.2-1~noble \
+      unit=1.34.2-1~noble \
     && rm -rf /var/lib/apt/lists/*
 
+# Copy the modified 'requirements*.txt' files, to have the files actually used during installation
+COPY --from=builder /requirements.txt /requirements-container.txt /opt/netbox/
+COPY --from=builder /usr/local/bin/uv /usr/local/bin/
 COPY --from=builder /opt/netbox/venv /opt/netbox/venv
 
 ARG NETBOX_PATH
@@ -67,25 +79,25 @@ COPY ${NETBOX_PATH} /opt/netbox
 COPY docker/configuration.docker.py /opt/netbox/netbox/netbox/configuration.py
 COPY docker/ldap_config.docker.py /opt/netbox/netbox/netbox/ldap_config.py
 COPY docker/docker-entrypoint.sh /opt/netbox/docker-entrypoint.sh
-COPY docker/housekeeping.sh /opt/netbox/housekeeping.sh
 COPY docker/launch-netbox.sh /opt/netbox/launch-netbox.sh
-COPY startup_scripts/ /opt/netbox/startup_scripts/
-COPY initializers/ /opt/netbox/initializers/
 COPY configuration/ /etc/netbox/config/
 COPY docker/nginx-unit.json /etc/unit/
+COPY VERSION /opt/netbox/VERSION
 
 WORKDIR /opt/netbox/netbox
 
 # Must set permissions for '/opt/netbox/netbox/media' directory
 # to g+w so that pictures can be uploaded to netbox.
-RUN mkdir -p static /opt/unit/state/ /opt/unit/tmp/ \
-      && chown -R unit:root media /opt/unit/ \
-      && chmod -R g+w media /opt/unit/ \
-      && cd /opt/netbox/ && SECRET_KEY="dummy" /opt/netbox/venv/bin/python -m mkdocs build \
+RUN mkdir -p static media /opt/unit/state/ /opt/unit/tmp/ \
+      && chown -R unit:root /opt/unit/ media reports scripts \
+      && chmod -R g+w /opt/unit/ media reports scripts \
+      && cd /opt/netbox/ && SECRET_KEY="dummyKeyWithMinimumLength-------------------------" /opt/netbox/venv/bin/python -m mkdocs build \
           --config-file /opt/netbox/mkdocs.yml --site-dir /opt/netbox/netbox/project-static/docs/ \
-      && SECRET_KEY="dummy" /opt/netbox/venv/bin/python /opt/netbox/netbox/manage.py collectstatic --no-input
+      && DEBUG="true" SECRET_KEY="dummyKeyWithMinimumLength-------------------------" /opt/netbox/venv/bin/python /opt/netbox/netbox/manage.py collectstatic --no-input \
+      && mkdir /opt/netbox/netbox/local \
+      && echo "build: Docker-$(cat /opt/netbox/VERSION)" > /opt/netbox/netbox/local/release.yaml
 
-ENV LANG=C.UTF-8
+ENV LANG=C.utf8 PATH=/opt/netbox/venv/bin:$PATH VIRTUAL_ENV=/opt/netbox/venv UV_NO_CACHE=1
 ENTRYPOINT [ "/usr/bin/tini", "--" ]
 
 CMD [ "/opt/netbox/docker-entrypoint.sh", "/opt/netbox/launch-netbox.sh" ]

MAINTAINERS.md

@@ -0,0 +1,19 @@
+# Maintainers of _NetBox Docker_
+
+This file lists all currently recognized maintainers of the _NetBox Docker_ project in alphabetical order:
+
+- @cimnine
+- @tobiasge
+
+## Stepping Down
+
+Every maintainer is a volunteer and may step down as maintainer at any time without providing any reason.
+To make this explicit, the maintainer is asked to update this file.
+
+The last maintainer stepping down is asked to archive the project on GitHub to indicate that the project is no longer maintained.
+
+## Signing up
+
+Everyone is welcome to sign up as maintainer by creating a PR and add their own username to the list.
+The current maintainers shall discuss the application.
+They may turn down an application if they don't feel confident that the new maintainer is a positive addition.

PRINCIPALS.md

@@ -0,0 +1,71 @@
+# Development, Maintenance and Community Principals for _NetBox Docker_
+
+These principals shall guide the development and the maintenance of _NetBox Docker_.
+
+## Basic principals
+
+This project is maintained on voluntary basis.
+Everyone is asked to respect that.
+
+This means, that …
+
+- … sometimes features are not implemented as fast as one might like -- or not at all.
+- … sometimes nobody is looking at bugs, or they are not fixed as fast as one might like -- or not at all.
+- … sometimes PRs are not reviewed for an extended period.
+
+Everyone is welcome to provide improvements and bugfixes to the benefit of everyone else.
+
+## Development Principals
+
+The goal of the _NetBox Docker_ project is to provide a container to run the basic NetBox project.
+The container should feel like a native container -- as if it were provided by NetBox itself:
+
+- Configuration via environment variables where feasible.
+  - Except: Whenever a complex type such as a `dict` is required as value of a configuration setting,
+    then it shall not be provided through an environment variable.
+- Configuration of secrets via secret files.
+- Log output to standard out (STDOUT/`&1`) / standard error (STDERR/`&2`).
+- Volumes for data and cache directories.
+  - Otherwise, no mounts shall be necessary.
+- Runs a non-root user by default.
+- One process / role for each instance.
+
+The container generally does not provide more features than the basic NetBox project itself provides.
+It may provide additional Python dependencies than the upstream project,
+so that all configurable features of NetBox can be used in the container without further modification.
+The container may provide helpers, so that it feels and behaves like a native container.
+
+The container does not bundle any community plugins.
+
+## Maintenance Principals
+
+The main goals of maintaining _NetBox Docker_ are:
+
+- Keeping the project at a high quality level.
+- Keeping the maintenance effort minimal.
+- Coordinating development efforts.
+
+The following guidelines help us to achieve these goals:
+
+- As many maintenance tasks as possible shall be automated or scripted.
+- All manual tasks must be documented.
+- All changes are reviewed by at least one maintainer.
+  - Changes of maintainers are reviewed by at least one other maintainer.
+    (Except if there's only one maintainer left.)
+- The infrastructure beyond what GitHub provides shall be kept to a minimum.
+  - On request, every maintainer shall get access to infrastructure that is beyond GitHub
+    (at the time of writing that's _Docker Hub_ and _Quay_ in particular).
+
+## Community Principals
+
+This project is developed by the NetBox community for the NetBox community.
+We welcome contributions, as long as they are in line with the principals above.
+
+The maintainers of NetBox Docker are not the support team.
+The community is expected to help each other out.
+
+Always remember:
+Behind every screen (or screen-reader) on the other end is a fellow human.
+Be nice and respectful, thankful for help,
+and value ideas and contributions,
+even when they don't fit the goals.

README.md

@@ -3,20 +3,24 @@
 [![GitHub release (latest by date)](https://img.shields.io/github/v/release/netbox-community/netbox-docker)][github-release]
 [![GitHub stars](https://img.shields.io/github/stars/netbox-community/netbox-docker)][github-stargazers]
 ![GitHub closed pull requests](https://img.shields.io/github/issues-pr-closed-raw/netbox-community/netbox-docker)
-![Github release workflow](https://img.shields.io/github/workflow/status/netbox-community/netbox-docker/release)
+![Github release workflow](https://img.shields.io/github/actions/workflow/status/netbox-community/netbox-docker/release.yml?branch=release)
 ![Docker Pulls](https://img.shields.io/docker/pulls/netboxcommunity/netbox)
 [![GitHub license](https://img.shields.io/github/license/netbox-community/netbox-docker)][netbox-docker-license]
 
-[The GitHub repository](netbox-docker-github) houses the components needed to build NetBox as a container.
-Images are built regularly using the code in that repository and are pushed to [Docker Hub][netbox-dockerhub], [Quay.io][netbox-quayio] and [GitHub Container Registry][netbox-ghcr].
+[The GitHub repository][netbox-docker-github] houses the components needed to build NetBox as a container.
+Images are built regularly using the code in that repository
+and are pushed to [Docker Hub][netbox-dockerhub],
+[Quay.io][netbox-quayio] and [GitHub Container Registry][netbox-ghcr].
+_NetBox Docker_ is a project developed and maintained by the _NetBox_ community.
 
 Do you have any questions?
-Before opening an issue on Github,
-please join [our Slack][netbox-docker-slack] and ask for help in the [`#netbox-docker`][netbox-docker-slack-channel] channel.
+Before opening an issue on GitHub,
+please join [our Slack][netbox-docker-slack]
+and ask for help in the [`#netbox-docker`][netbox-docker-slack-channel] channel,
+or start a new [GitHub Discussion][github-discussions].
 
 [github-stargazers]: https://github.com/netbox-community/netbox-docker/stargazers
 [github-release]: https://github.com/netbox-community/netbox-docker/releases
-[netbox-docker-microbadger]: https://microbadger.com/images/netboxcommunity/netbox
 [netbox-dockerhub]: https://hub.docker.com/r/netboxcommunity/netbox/
 [netbox-quayio]: https://quay.io/repository/netboxcommunity/netbox
 [netbox-ghcr]: https://github.com/netbox-community/netbox-docker/pkgs/container/netbox
@@ -25,6 +29,7 @@ please join [our Slack][netbox-docker-slack] and ask for help in the [`#netbox-d
 [netbox-docker-slack-channel]: https://netdev-community.slack.com/archives/C01P0GEVBU7
 [netbox-slack-channel]: https://netdev-community.slack.com/archives/C01P0FRSXRV
 [netbox-docker-license]: https://github.com/netbox-community/netbox-docker/blob/release/LICENSE
+[github-discussions]: https://github.com/netbox-community/netbox-docker/discussions
 
 ## Quickstart
 
@@ -34,29 +39,27 @@ There is a more complete [_Getting Started_ guide on our wiki][wiki-getting-star
 ```bash
 git clone -b release https://github.com/netbox-community/netbox-docker.git
 cd netbox-docker
-tee docker-compose.override.yml <<EOF
-version: '3.4'
-services:
-  netbox:
-    ports:
-      - 8000:8080
-EOF
-docker-compose pull
-docker-compose up
+# Copy the example override file
+cp docker-compose.override.yml.example docker-compose.override.yml
+# Read and edit the file to your liking
+docker compose pull
+docker compose up
 ```
 
 The whole application will be available after a few minutes.
 Open the URL `http://0.0.0.0:8000/` in a web-browser.
 You should see the NetBox homepage.
-In the top-right corner you can login.
-The default credentials are:
 
-* Username: **admin**
-* Password: **admin**
-* API Token: **0123456789abcdef0123456789abcdef01234567**
+To create the first admin user run this command:
+
+```bash
+docker compose exec netbox /opt/netbox/netbox/manage.py createsuperuser
+```
+
+If you need to restart Netbox from an empty database often,
+you can also set the `SUPERUSER_*` variables in your `docker-compose.override.yml`.
 
 [wiki-getting-started]: https://github.com/netbox-community/netbox-docker/wiki/Getting-Started
-[docker-reception]: https://github.com/nxt-engineering/reception
 
 ## Container Image Tags
 
@@ -64,50 +67,39 @@ New container images are built and published automatically every ~24h.
 
 > We recommend to use either the `vX.Y.Z-a.b.c` tags or the `vX.Y-a.b.c` tags in production!
 
-* `vX.Y.Z-a.b.c`, `vX.Y-a.b.c`:
+- `vX.Y.Z-a.b.c`, `vX.Y-a.b.c`:
   These are release builds containing _NetBox version_ `vX.Y.Z`.
   They contain the support files of _NetBox Docker version_ `a.b.c`.
   You must use _NetBox Docker version_ `a.b.c` to guarantee the compatibility.
   These images are automatically built from [the corresponding releases of NetBox][netbox-releases].
-* `latest-a.b.c`:
+- `latest-a.b.c`:
   These are release builds, containing the latest stable version of NetBox.
   They contain the support files of _NetBox Docker version_ `a.b.c`.
   You must use _NetBox Docker version_ `a.b.c` to guarantee the compatibility.
-  These images are automatically built from [the `master` branch of NetBox][netbox-master].
-* `snapshot-a.b.c`:
+- `snapshot-a.b.c`:
   These are prerelease builds.
   They contain the support files of _NetBox Docker version_ `a.b.c`.
   You must use _NetBox Docker version_ `a.b.c` to guarantee the compatibility.
-  These images are automatically built from the [`develop` branch of NetBox][netbox-develop].
+  These images are automatically built from the [`main` branch of NetBox][netbox-main].
 
 For each of the above tag, there is an extra tag:
 
-* `vX.Y.Z`, `vX.Y`:
+- `vX.Y.Z`, `vX.Y`:
   This is the same version as `vX.Y.Z-a.b.c` (or `vX.Y-a.b.c`, respectively).
-  It always points to the latest version of _NetBox Docker_.
-* `latest`
+- `latest`
   This is the same version as `latest-a.b.c`.
   It always points to the latest version of _NetBox Docker_.
-* `snapshot`
+- `snapshot`
   This is the same version as `snapshot-a.b.c`.
   It always points to the latest version of _NetBox Docker_.
 
-Then there is currently one extra tags for each of the above tags:
-
-* `-ldap`:
-  These container images contain additional dependencies and configuration files for connecting NetBox to an LDAP directory.
-  [Learn more about that in our wiki][netbox-docker-ldap].
-
 [netbox-releases]: https://github.com/netbox-community/netbox/releases
-[netbox-master]: https://github.com/netbox-community/netbox/tree/master
-[netbox-develop]: https://github.com/netbox-community/netbox/tree/develop
-[netbox-branches]: https://github.com/netbox-community/netbox/branches
-[netbox-docker-ldap]: https://github.com/netbox-community/netbox-docker/wiki/LDAP
+[netbox-main]: https://github.com/netbox-community/netbox/tree/main
 
 ## Documentation
 
 Please refer [to our wiki on GitHub][netbox-docker-wiki] for further information on how to use the NetBox Docker image properly.
-The wiki covers advanced topics such as using files for secrets, configuring TLS, deployment to Kubernetes, monitoring and configuring NAPALM and LDAP.
+The wiki covers advanced topics such as using files for secrets, configuring TLS, deployment to Kubernetes, monitoring and configuring LDAP.
 
 Our wiki is a community effort.
 Feel free to correct errors, update outdated information or provide additional guides and insights.
@@ -118,7 +110,7 @@ Feel free to correct errors, update outdated information or provide additional g
 
 Feel free to ask questions in our [GitHub Community][netbox-community]
 or [join our Slack][netbox-docker-slack] and ask [in our channel `#netbox-docker`][netbox-docker-slack-channel],
-which is free to use and where there are almost always people online that can help you in the Slack channel.
+which is free to use and where there are almost always people online that can help you.
 
 If you need help with using NetBox or developing for it or against it's API
 you may find [the `#netbox` channel][netbox-slack-channel] on the same Slack instance very helpful.
@@ -127,17 +119,18 @@ you may find [the `#netbox` channel][netbox-slack-channel] on the same Slack ins
 
 ## Dependencies
 
-This project relies only on *Docker* and *docker-compose* meeting these requirements:
+This project relies only on _Docker_ and _docker-compose_ meeting these requirements:
 
-* The *Docker version* must be at least `19.03`.
-* The *docker-compose version* must be at least `1.28.0`.
+- The _Docker version_ must be at least `20.10.10`.
+- The _containerd version_ must be at least `1.5.6`.
+- The _docker-compose version_ must be at least `1.28.0`.
 
-To check the version installed on your system run `docker --version` and `docker-compose --version`.
+To check the version installed on your system run `docker --version` and `docker compose version`.
 
 ## Updating
 
 Please read [the release notes][releases] carefully when updating to a new image version.
-Note that the version of the NetBox Docker container image must stay in sync with the code.
+Note that the version of the NetBox Docker container image must stay in sync with the version of the Git repository.
 
 If you update for the first time, be sure [to follow our _How To Update NetBox Docker_ guide in the wiki][netbox-docker-wiki-updating].
 
@@ -146,7 +139,8 @@ If you update for the first time, be sure [to follow our _How To Update NetBox D
 
 ## Rebuilding the Image
 
-`./build.sh` can be used to rebuild the container image. See `./build.sh --help` for more information.
+`./build.sh` can be used to rebuild the container image.
+See `./build.sh --help` for more information or `./build-latest.sh` for an example.
 
 For more details on custom builds [consult our wiki][netbox-docker-wiki-build].
 
@@ -155,13 +149,15 @@ For more details on custom builds [consult our wiki][netbox-docker-wiki-build].
 ## Tests
 
 We have a test script.
-It runs NetBox's own unit tests and ensures that all initializers work:
+It runs NetBox's own unit tests and ensures that NetBox starts:
 
 ```bash
-IMAGE=netboxcommunity/netbox:latest ./test.sh
+IMAGE=docker.io/netboxcommunity/netbox:latest ./test.sh
 ```
 
 ## Support
 
 This repository is currently maintained by the community.
+The community is expected to help each other.
+
 Please consider sponsoring the maintainers of this project.

VERSION

@@ -1 +1 @@
-2.0.0
+3.4.2

actionlint.yml

@@ -0,0 +1,5 @@
+---
+paths:
+  .github/workflows/**/*.{yml,yaml}:
+    ignore:
+      - ".*ubuntu-24.04-arm.*"

build-functions/check-commands.sh

@@ -0,0 +1,9 @@
+#!/bin/bash
+
+NEEDED_COMMANDS="curl jq docker skopeo"
+for c in $NEEDED_COMMANDS; do
+  if ! command -v "$c" &>/dev/null; then
+    echo "⚠️  '$c' is not installed. Can't proceed with build."
+    exit 1
+  fi
+done

build-functions/docker-functions.sh

@@ -1,8 +0,0 @@
-#!/bin/bash
-
-push_image_to_registry() {
-  local target_tag=$1
-  echo "⏫ Pushing '${target_tag}'"
-  $DRY docker push "${target_tag}"
-  echo "✅ Finished pushing the Docker image '${target_tag}'."
-}

build-functions/get-public-image-config.sh

@@ -1,82 +1,18 @@
 #!/bin/bash
-# Retrieves image configuration from public images in DockerHub
-# Functions from https://gist.github.com/cirocosta/17ea17be7ac11594cb0f290b0a3ac0d1
-# Optimised for our use case
+
+check_if_tags_exists() {
+  local image=$1
+  local tag=$2
+  skopeo list-tags "docker://$image" | jq -r ".Tags | contains([\"$tag\"])"
+}
 
 get_image_label() {
   local label=$1
   local image=$2
-  local tag=$3
-  local token
-  token=$(_get_token "$image")
-  local digest
-  digest=$(_get_digest "$image" "$tag" "$token")
-  local retval="null"
-  if [ "$digest" != "null" ]; then
-    retval=$(_get_image_configuration "$image" "$token" "$digest" "$label")
-  fi
-  echo "$retval"
-}
-
-get_image_layers() {
-  local image=$1
-  local tag=$2
-  local token
-  token=$(_get_token "$image")
-  _get_layers "$image" "$tag" "$token"
+  skopeo inspect "docker://$image" | jq -r ".Labels[\"$label\"]"
 }
 
 get_image_last_layer() {
   local image=$1
-  local tag=$2
-  local token
-  token=$(_get_token "$image")
-  local layers
-  mapfile -t layers < <(_get_layers "$image" "$tag" "$token")
-  echo "${layers[-1]}"
-}
-
-_get_image_configuration() {
-  local image=$1
-  local token=$2
-  local digest=$3
-  local label=$4
-  curl \
-    --silent \
-    --location \
-    --header "Authorization: Bearer $token" \
-    "https://registry-1.docker.io/v2/$image/blobs/$digest" |
-    jq -r ".config.Labels.\"$label\""
-}
-
-_get_token() {
-  local image=$1
-  curl \
-    --silent \
-    "https://auth.docker.io/token?scope=repository:$image:pull&service=registry.docker.io" |
-    jq -r '.token'
-}
-
-_get_digest() {
-  local image=$1
-  local tag=$2
-  local token=$3
-  curl \
-    --silent \
-    --header "Accept: application/vnd.docker.distribution.manifest.v2+json" \
-    --header "Authorization: Bearer $token" \
-    "https://registry-1.docker.io/v2/$image/manifests/$tag" |
-    jq -r '.config.digest'
-}
-
-_get_layers() {
-  local image=$1
-  local tag=$2
-  local token=$3
-  curl \
-    --silent \
-    --header "Accept: application/vnd.docker.distribution.manifest.v2+json" \
-    --header "Authorization: Bearer $token" \
-    "https://registry-1.docker.io/v2/$image/manifests/$tag" |
-    jq -r '.layers[].digest'
+  skopeo inspect "docker://$image" | jq -r ".Layers | last"
 }

build-functions/gh-functions.sh

@@ -19,3 +19,14 @@ gh_env() {
     echo "${@}" >>"${GITHUB_ENV}"
   fi
 }
+
+###
+# Prints the output to the file defined in ${GITHUB_OUTPUT}.
+# Only executes if ${GH_ACTION} is defined.
+# Example Usage: gh_env "FOO_VAR=bar_value"
+###
+gh_out() {
+  if [ -n "${GH_ACTION}" ]; then
+    echo "${@}" >>"$GITHUB_OUTPUT"
+  fi
+}

build-latest.sh

@@ -1,26 +1,27 @@
 #!/bin/bash
 # Builds the latest released version
 
+# Check if we have everything needed for the build
+source ./build-functions/check-commands.sh
+
+source ./build-functions/gh-functions.sh
+
 echo "▶️ $0 $*"
 
-###
-# Check for the jq library needed for parsing JSON
-###
-if ! command -v jq; then
-  echo "⚠️  jq command missing from \$PATH!"
-  exit 1
-fi
+CURL_ARGS=(
+  --silent
+)
 
 ###
-# Checking for the presence of GITHUB_OAUTH_CLIENT_ID
-# and GITHUB_OAUTH_CLIENT_SECRET
+# Checking for the presence of GITHUB_TOKEN
 ###
-if [ -n "${GITHUB_OAUTH_CLIENT_ID}" ] && [ -n "${GITHUB_OAUTH_CLIENT_SECRET}" ]; then
+if [ -n "${GITHUB_TOKEN}" ]; then
   echo "🗝 Performing authenticated Github API calls."
-  GITHUB_OAUTH_PARAMS="client_id=${GITHUB_OAUTH_CLIENT_ID}&client_secret=${GITHUB_OAUTH_CLIENT_SECRET}"
+  CURL_ARGS+=(
+    --header "Authorization: Bearer ${GITHUB_TOKEN}"
+  )
 else
   echo "🕶 Performing unauthenticated Github API calls. This might result in lower Github rate limits!"
-  GITHUB_OAUTH_PARAMS=""
 fi
 
 ###
@@ -42,31 +43,27 @@ fi
 ###
 ORIGINAL_GITHUB_REPO="netbox-community/netbox"
 GITHUB_REPO="${GITHUB_REPO-$ORIGINAL_GITHUB_REPO}"
-URL_RELEASES="https://api.github.com/repos/${GITHUB_REPO}/releases?${GITHUB_OAUTH_PARAMS}"
+URL_RELEASES="https://api.github.com/repos/${GITHUB_REPO}/releases"
 
 # Composing the JQ commans to extract the most recent version number
 JQ_LATEST="group_by(.prerelease) | .[] | sort_by(.published_at) | reverse | .[0] | select(.prerelease==${PRERELEASE-false}) | .tag_name"
 
-CURL="curl -sS"
+CURL="curl"
 
 # Querying the Github API to fetch the most recent version number
-VERSION=$($CURL "${URL_RELEASES}" | jq -r "${JQ_LATEST}")
+VERSION=$($CURL "${CURL_ARGS[@]}" "${URL_RELEASES}" | jq -r "${JQ_LATEST}" 2>/dev/null)
 
 ###
 # Check if the prerelease version is actually higher than stable version
 ###
 if [ "${PRERELEASE}" == "true" ]; then
   JQ_STABLE="group_by(.prerelease) | .[] | sort_by(.published_at) | reverse | .[0] | select(.prerelease==false) | .tag_name"
-  STABLE_VERSION=$($CURL "${URL_RELEASES}" | jq -r "${JQ_STABLE}")
+  STABLE_VERSION=$($CURL "${CURL_ARGS[@]}" "${URL_RELEASES}" | jq -r "${JQ_STABLE}" 2>/dev/null)
 
-  # shellcheck disable=SC2003
-  MAJOR_STABLE=$(expr match "${STABLE_VERSION}" 'v\([0-9]\+\)')
-  # shellcheck disable=SC2003
-  MINOR_STABLE=$(expr match "${STABLE_VERSION}" 'v[0-9]\+\.\([0-9]\+\)')
-  # shellcheck disable=SC2003
-  MAJOR_UNSTABLE=$(expr match "${VERSION}" 'v\([0-9]\+\)')
-  # shellcheck disable=SC2003
-  MINOR_UNSTABLE=$(expr match "${VERSION}" 'v[0-9]\+\.\([0-9]\+\)')
+  MAJOR_STABLE=$(expr "${STABLE_VERSION}" : 'v\([0-9]\+\)')
+  MINOR_STABLE=$(expr "${STABLE_VERSION}" : 'v[0-9]\+\.\([0-9]\+\)')
+  MAJOR_UNSTABLE=$(expr "${VERSION}" : 'v\([0-9]\+\)')
+  MINOR_UNSTABLE=$(expr "${VERSION}" : 'v[0-9]\+\.\([0-9]\+\)')
 
   if {
     [ "${MAJOR_STABLE}" -eq "${MAJOR_UNSTABLE}" ] &&
@@ -75,10 +72,7 @@ if [ "${PRERELEASE}" == "true" ]; then
 
     echo "❎ Latest unstable version '${VERSION}' is not higher than the latest stable version '$STABLE_VERSION'."
     if [ -z "$DEBUG" ]; then
-      if [ -n "${GH_ACTION}" ]; then
-        echo "::set-output name=skipped::true"
-      fi
-
+      gh_out "skipped=true"
       exit 0
     else
       echo "⚠️ Would exit here with code '0', but DEBUG is enabled."

build.sh

@@ -6,87 +6,127 @@ echo "▶️ $0 $*"
 set -e
 
 if [ "${1}x" == "x" ] || [ "${1}" == "--help" ] || [ "${1}" == "-h" ]; then
-  echo "Usage: ${0} <branch> [--push|--push-only]"
-  echo "  branch       The branch or tag to build. Required."
-  echo "  --push       Pushes the built Docker image to the registry."
-  echo "  --push-only  Only pushes the Docker image to the registry, but does not build it."
-  echo ""
-  echo "You can use the following ENV variables to customize the build:"
-  echo "  SRC_ORG     Which fork of netbox to use (i.e. github.com/\${SRC_ORG}/\${SRC_REPO})."
-  echo "              Default: netbox-community"
-  echo "  SRC_REPO    The name of the repository to use (i.e. github.com/\${SRC_ORG}/\${SRC_REPO})."
-  echo "              Default: netbox"
-  echo "  URL         Where to fetch the code from."
-  echo "              Must be a git repository. Can be private."
-  echo "              Default: https://github.com/\${SRC_ORG}/\${SRC_REPO}.git"
-  echo "  NETBOX_PATH The path where netbox will be checkout out."
-  echo "              Must not be outside of the netbox-docker repository (because of Docker)!"
-  echo "              Default: .netbox"
-  echo "  SKIP_GIT    If defined, git is not invoked and \${NETBOX_PATH} will not be altered."
-  echo "              This may be useful, if you are manually managing the NETBOX_PATH."
-  echo "              Default: undefined"
-  echo "  TAG         The version part of the docker tag."
-  echo "              Default:"
-  echo "                When <branch>=master:  latest"
-  echo "                When <branch>=develop: snapshot"
-  echo "                Else:                  same as <branch>"
-  echo "  DOCKER_REGISTRY The Docker repository's registry (i.e. '\${DOCKER_REGISTRY}/\${DOCKER_ORG}/\${DOCKER_REPO}'')"
-  echo "              Used for tagging the image."
-  echo "              Default: docker.io"
-  echo "  DOCKER_ORG  The Docker repository's organisation (i.e. '\${DOCKER_REGISTRY}/\${DOCKER_ORG}/\${DOCKER_REPO}'')"
-  echo "              Used for tagging the image."
-  echo "              Default: netboxcommunity"
-  echo "  DOCKER_REPO The Docker repository's name (i.e. '\${DOCKER_REGISTRY}/\${DOCKER_ORG}/\${DOCKER_REPO}'')"
-  echo "              Used for tagging the image."
-  echo "              Default: netbox"
-  echo "  DOCKER_TAG  The name of the tag which is applied to the image."
-  echo "              Useful for pushing into another registry than hub.docker.com."
-  echo "              Default: \${DOCKER_REGISTRY}/\${DOCKER_ORG}/\${DOCKER_REPO}:\${TAG}"
-  echo "  DOCKER_SHORT_TAG The name of the short tag which is applied to the"
-  echo "              image. This is used to tag all patch releases to their"
-  echo "              containing version e.g. v2.5.1 -> v2.5"
-  echo "              Default: \${DOCKER_REGISTRY}/\${DOCKER_ORG}/\${DOCKER_REPO}:<MAJOR>.<MINOR>"
-  echo "  DOCKERFILE  The name of Dockerfile to use."
-  echo "              Default: Dockerfile"
-  echo "  DOCKER_FROM The base image to use."
-  echo "              Default: 'debian:11-slim'"
-  echo "  DOCKER_TARGET A specific target to build."
-  echo "              It's currently not possible to pass multiple targets."
-  echo "              Default: main"
-  echo "  HTTP_PROXY  The proxy to use for http requests."
-  echo "              Example: http://proxy.domain.tld:3128"
-  echo "              Default: undefined"
-  echo "  NO_PROXY    Comma-separated list of domain extensions proxy should not be used for."
-  echo "              Example: .domain1.tld,.domain2.tld"
-  echo "              Default: undefined"
-  echo "  DEBUG       If defined, the script does not stop when certain checks are unsatisfied."
-  echo "              Default: undefined"
-  echo "  DRY_RUN     Prints all build statements instead of running them."
-  echo "              Default: undefined"
-  echo "  GH_ACTION   If defined, special 'echo' statements are enabled that set the"
-  echo "              following environment variables in Github Actions:"
-  echo "              - FINAL_DOCKER_TAG: The final value of the DOCKER_TAG env variable"
-  echo "              Default: undefined"
-  echo ""
-  echo "Examples:"
-  echo "  ${0} master"
-  echo "              This will fetch the latest 'master' branch, build a Docker Image and tag it"
-  echo "              'netboxcommunity/netbox:latest'."
-  echo "  ${0} develop"
-  echo "              This will fetch the latest 'develop' branch, build a Docker Image and tag it"
-  echo "              'netboxcommunity/netbox:snapshot'."
-  echo "  ${0} v2.6.6"
-  echo "              This will fetch the 'v2.6.6' tag, build a Docker Image and tag it"
-  echo "              'netboxcommunity/netbox:v2.6.6' and 'netboxcommunity/netbox:v2.6'."
-  echo "  ${0} develop-2.7"
-  echo "              This will fetch the 'develop-2.7' branch, build a Docker Image and tag it"
-  echo "              'netboxcommunity/netbox:develop-2.7'."
-  echo "  SRC_ORG=cimnine ${0} feature-x"
-  echo "              This will fetch the 'feature-x' branch from https://github.com/cimnine/netbox.git,"
-  echo "              build a Docker Image and tag it 'netboxcommunity/netbox:feature-x'."
-  echo "  SRC_ORG=cimnine DOCKER_ORG=cimnine ${0} feature-x"
-  echo "              This will fetch the 'feature-x' branch from https://github.com/cimnine/netbox.git,"
-  echo "              build a Docker Image and tag it 'cimnine/netbox:feature-x'."
+  _BOLD=$(tput bold)
+  _GREEN=$(tput setaf 2)
+  _CYAN=$(tput setaf 6)
+  _CLEAR=$(tput sgr0)
+
+  cat <<END_OF_HELP
+${_BOLD}Usage:${_CLEAR} ${0} <branch> [--push]
+
+branch       The branch or tag to build. Required.
+--push       Pushes the built container image to the registry.
+
+${_BOLD}You can use the following ENV variables to customize the build:${_CLEAR}
+
+SRC_ORG     Which fork of netbox to use (i.e. github.com/\${SRC_ORG}/\${SRC_REPO}).
+            ${_GREEN}Default:${_CLEAR} netbox-community
+            
+SRC_REPO    The name of the repository to use (i.e. github.com/\${SRC_ORG}/\${SRC_REPO}).
+            ${_GREEN}Default:${_CLEAR} netbox
+            
+URL         Where to fetch the code from.
+            Must be a git repository. Can be private.
+            ${_GREEN}Default:${_CLEAR} https://github.com/\${SRC_ORG}/\${SRC_REPO}.git
+
+NETBOX_PATH The path where netbox will be checkout out.
+            Must not be outside of the netbox-docker repository (because of Docker)!
+            ${_GREEN}Default:${_CLEAR} .netbox
+
+SKIP_GIT    If defined, git is not invoked and \${NETBOX_PATH} will not be altered.
+            This may be useful, if you are manually managing the NETBOX_PATH.
+            ${_GREEN}Default:${_CLEAR} undefined
+
+TAG         The version part of the image tag.
+            ${_GREEN}Default:${_CLEAR}
+              When <branch>=main: snapshot
+              Else:               same as <branch>
+
+IMAGE_NAMES The names used for the image including the registry
+            Used for tagging the image.
+            ${_GREEN}Default:${_CLEAR} docker.io/netboxcommunity/netbox
+            ${_CYAN}Example:${_CLEAR} 'docker.io/netboxcommunity/netbox quay.io/netboxcommunity/netbox'
+
+DOCKER_TAG  The name of the tag which is applied to the image.
+            Useful for pushing into another registry than hub.docker.com.
+            ${_GREEN}Default:${_CLEAR} \${DOCKER_REGISTRY}/\${DOCKER_ORG}/\${DOCKER_REPO}:\${TAG}
+
+DOCKER_SHORT_TAG The name of the short tag which is applied to the
+            image. This is used to tag all patch releases to their
+            containing version e.g. v2.5.1 -> v2.5
+            ${_GREEN}Default:${_CLEAR} \${DOCKER_REGISTRY}/\${DOCKER_ORG}/\${DOCKER_REPO}:<MAJOR>.<MINOR>
+
+DOCKERFILE  The name of Dockerfile to use.
+            ${_GREEN}Default:${_CLEAR} Dockerfile
+
+DOCKER_FROM The base image to use.
+            ${_GREEN}Default:${_CLEAR} 'ubuntu:24.04'
+
+BUILDX_PLATFORM
+            Specifies the platform(s) to build the image for.
+            ${_CYAN}Example:${_CLEAR} 'linux/amd64,linux/arm64'
+            ${_GREEN}Default:${_CLEAR} 'linux/amd64'
+
+BUILDX_BUILDER_NAME
+            If defined, the image build will be assigned to the given builder.
+            If you specify this variable, make sure that the builder exists.
+            If this value is not defined, a new builx builder with the directory name of the
+            current directory (i.e. '$(basename "${PWD}")') is created."
+            ${_CYAN}Example:${_CLEAR} 'clever_lovelace'
+            ${_GREEN}Default:${_CLEAR} undefined
+
+BUILDX_REMOVE_BUILDER
+            If defined (and only if BUILDX_BUILDER_NAME is undefined),
+            then the buildx builder created by this script will be removed after use.
+            This is useful if you build NetBox Docker on an automated system that does
+            not manage the builders for you.
+            ${_CYAN}Example:${_CLEAR} 'on'
+            ${_GREEN}Default:${_CLEAR} undefined
+
+HTTP_PROXY  The proxy to use for http requests.
+            ${_CYAN}Example:${_CLEAR} http://proxy.domain.tld:3128
+            ${_GREEN}Default:${_CLEAR} undefined
+
+NO_PROXY    Comma-separated list of domain extensions proxy should not be used for.
+            ${_CYAN}Example:${_CLEAR} .domain1.tld,.domain2.tld
+            ${_GREEN}Default:${_CLEAR} undefined
+
+DEBUG       If defined, the script does not stop when certain checks are unsatisfied.
+            ${_GREEN}Default:${_CLEAR} undefined
+
+DRY_RUN     Prints all build statements instead of running them.
+            ${_GREEN}Default:${_CLEAR} undefined
+            
+GH_ACTION   If defined, special 'echo' statements are enabled that set the
+            following environment variables in Github Actions:
+            - FINAL_DOCKER_TAG: The final value of the DOCKER_TAG env variable
+            ${_GREEN}Default:${_CLEAR} undefined
+
+CHECK_ONLY  Only checks if the build is needed and sets the GH Action output.
+            ${_GREEN}Default:${_CLEAR} undefined
+
+${_BOLD}Examples:${_CLEAR}
+
+${0} main
+            This will fetch the latest 'main' branch, build a Docker Image and tag it
+            'netboxcommunity/netbox:snapshot'.
+
+${0} v4.2.0
+            This will fetch the 'v4.2.0' tag, build a Docker Image and tag it
+            'netboxcommunity/netbox:v4.2.0' and 'netboxcommunity/netbox:v4.2'.
+
+${0} feature
+            This will fetch the 'feature' branch, build a Docker Image and tag it
+            'netboxcommunity/netbox:feature'.
+
+SRC_ORG=cimnine ${0} feature-x
+            This will fetch the 'feature-x' branch from https://github.com/cimnine/netbox.git,
+            build a Docker Image and tag it 'netboxcommunity/netbox:feature-x'.
+
+SRC_ORG=cimnine DOCKER_ORG=cimnine ${0} feature-x
+            This will fetch the 'feature-x' branch from https://github.com/cimnine/netbox.git,
+            build a Docker Image and tag it 'cimnine/netbox:feature-x'.
+END_OF_HELP
 
   if [ "${1}x" == "x" ]; then
     exit 1
@@ -95,8 +135,15 @@ if [ "${1}x" == "x" ] || [ "${1}" == "--help" ] || [ "${1}" == "-h" ]; then
   fi
 fi
 
+# Check if we have everything needed for the build
+source ./build-functions/check-commands.sh
+# Load all build functions
+source ./build-functions/get-public-image-config.sh
 source ./build-functions/gh-functions.sh
 
+IMAGE_NAMES="${IMAGE_NAMES-docker.io/netboxcommunity/netbox}"
+IFS=' ' read -ra IMAGE_NAMES <<<"${IMAGE_NAMES}"
+
 ###
 # Enabling dry-run mode
 ###
@@ -125,7 +172,7 @@ if [ "${2}" != "--push-only" ] && [ -z "${SKIP_GIT}" ]; then
   REMOTE_EXISTS=$(git ls-remote --heads --tags "${URL}" "${NETBOX_BRANCH}" | wc -l)
   if [ "${REMOTE_EXISTS}" == "0" ]; then
     echo "❌ Remote branch '${NETBOX_BRANCH}' not found in '${URL}'; Nothing to do"
-    gh_echo "::set-output name=skipped::true"
+    gh_out "skipped=true"
     exit 0
   fi
   echo "🌐 Checking out '${NETBOX_BRANCH}' of NetBox from the url '${URL}' into '${NETBOX_PATH}'"
@@ -170,13 +217,13 @@ fi
 # Determining the value for DOCKER_FROM
 ###
 if [ -z "$DOCKER_FROM" ]; then
-  DOCKER_FROM="debian:11-slim"
+  DOCKER_FROM="docker.io/ubuntu:24.04"
 fi
 
 ###
 # Variables for labelling the docker image
 ###
-BUILD_DATE="$(date -u '+%Y-%m-%dT%H:%M+00:00')"
+BUILD_DATE="$(date -u '+%Y-%m-%dT%H:%M:%S+00:00')"
 
 if [ -d ".git" ] && [ -z "${SKIP_GIT}" ]; then
   GIT_REF="$(git rev-parse HEAD)"
@@ -208,10 +255,7 @@ DOCKER_REGISTRY="${DOCKER_REGISTRY-docker.io}"
 DOCKER_ORG="${DOCKER_ORG-netboxcommunity}"
 DOCKER_REPO="${DOCKER_REPO-netbox}"
 case "${NETBOX_BRANCH}" in
-master)
-  TAG="${TAG-latest}"
-  ;;
-develop)
+main)
   TAG="${TAG-snapshot}"
   ;;
 *)
@@ -220,89 +264,72 @@ develop)
 esac
 
 ###
-# Determine targets to build
+# composing the final TARGET_DOCKER_TAG
 ###
-DEFAULT_DOCKER_TARGETS=("main")
-DOCKER_TARGETS=("${DOCKER_TARGET:-"${DEFAULT_DOCKER_TARGETS[@]}"}")
-echo "🏭 Building the following targets:" "${DOCKER_TARGETS[@]}"
-
-gh_echo "::endgroup::"
+TARGET_DOCKER_TAG="${DOCKER_TAG-${TAG}}"
+TARGET_DOCKER_TAG_PROJECT="${TARGET_DOCKER_TAG}-${PROJECT_VERSION}"
 
 ###
-# Build each target
+# composing the additional DOCKER_SHORT_TAG,
+# i.e. "v4.2.0" becomes "v4.2",
+# which is only relevant for version tags
+# Also let "latest" follow the highest version
 ###
-export DOCKER_BUILDKIT=${DOCKER_BUILDKIT-1}
-for DOCKER_TARGET in "${DOCKER_TARGETS[@]}"; do
-  gh_echo "::group::🏗 Building the target '${DOCKER_TARGET}'"
-  echo "🏗 Building the target '${DOCKER_TARGET}'"
-
-  ###
-  # composing the final TARGET_DOCKER_TAG
-  ###
-  TARGET_DOCKER_TAG="${DOCKER_TAG-${DOCKER_REGISTRY}/${DOCKER_ORG}/${DOCKER_REPO}:${TAG}}"
-  if [ "${DOCKER_TARGET}" != "main" ]; then
-    TARGET_DOCKER_TAG="${TARGET_DOCKER_TAG}-${DOCKER_TARGET}"
-  fi
-  TARGET_DOCKER_TAG_PROJECT="${TARGET_DOCKER_TAG}-${PROJECT_VERSION}"
-
-  gh_env "FINAL_DOCKER_TAG=${TARGET_DOCKER_TAG_PROJECT}"
-  gh_echo "::set-output name=skipped::false"
-
-  ###
-  # composing the additional DOCKER_SHORT_TAG,
-  # i.e. "v2.6.1" becomes "v2.6",
-  # which is only relevant for version tags
-  # Also let "latest" follow the highest version
-  ###
-  if [[ "${TAG}" =~ ^v([0-9]+)\.([0-9]+)\.[0-9]+$ ]]; then
+if [[ "${TAG}" =~ ^v([0-9]+)\.([0-9]+)\.[0-9]+$ ]]; then
   MAJOR=${BASH_REMATCH[1]}
   MINOR=${BASH_REMATCH[2]}
 
-    TARGET_DOCKER_SHORT_TAG="${DOCKER_SHORT_TAG-${DOCKER_REGISTRY}/${DOCKER_ORG}/${DOCKER_REPO}:v${MAJOR}.${MINOR}}"
-    TARGET_DOCKER_LATEST_TAG="${DOCKER_REGISTRY}/${DOCKER_ORG}/${DOCKER_REPO}:latest"
-
-    if [ "${DOCKER_TARGET}" != "main" ]; then
-      TARGET_DOCKER_SHORT_TAG="${TARGET_DOCKER_SHORT_TAG}-${DOCKER_TARGET}"
-      TARGET_DOCKER_LATEST_TAG="${TARGET_DOCKER_LATEST_TAG}-${DOCKER_TARGET}"
-    fi
-
+  TARGET_DOCKER_SHORT_TAG="${DOCKER_SHORT_TAG-v${MAJOR}.${MINOR}}"
+  TARGET_DOCKER_LATEST_TAG="latest"
   TARGET_DOCKER_SHORT_TAG_PROJECT="${TARGET_DOCKER_SHORT_TAG}-${PROJECT_VERSION}"
   TARGET_DOCKER_LATEST_TAG_PROJECT="${TARGET_DOCKER_LATEST_TAG}-${PROJECT_VERSION}"
-  fi
+fi
 
-  ###
-  # Proceeding to buils stage, except if `--push-only` is passed
-  ###
-  if [ "${2}" != "--push-only" ]; then
-    ###
-    # Checking if the build is necessary,
-    # meaning build only if one of those values changed:
-    # - base image digest
-    # - netbox git ref (Label: netbox.git-ref)
-    # - netbox-docker git ref (Label: org.opencontainers.image.revision)
-    ###
-    # Load information from registry (only for docker.io)
-    SHOULD_BUILD="false"
-    BUILD_REASON=""
-    if [ -z "${GH_ACTION}" ]; then
+IMAGE_NAME_TAGS=()
+for IMAGE_NAME in "${IMAGE_NAMES[@]}"; do
+  IMAGE_NAME_TAGS+=("${IMAGE_NAME}:${TARGET_DOCKER_TAG}")
+  IMAGE_NAME_TAGS+=("${IMAGE_NAME}:${TARGET_DOCKER_TAG_PROJECT}")
+done
+if [ -n "${TARGET_DOCKER_SHORT_TAG}" ]; then
+  for IMAGE_NAME in "${IMAGE_NAMES[@]}"; do
+    IMAGE_NAME_TAGS+=("${IMAGE_NAME}:${TARGET_DOCKER_SHORT_TAG}")
+    IMAGE_NAME_TAGS+=("${IMAGE_NAME}:${TARGET_DOCKER_SHORT_TAG_PROJECT}")
+    IMAGE_NAME_TAGS+=("${IMAGE_NAME}:${TARGET_DOCKER_LATEST_TAG}")
+    IMAGE_NAME_TAGS+=("${IMAGE_NAME}:${TARGET_DOCKER_LATEST_TAG_PROJECT}")
+  done
+fi
+
+FINAL_DOCKER_TAG="${IMAGE_NAME_TAGS[0]}"
+gh_env "FINAL_DOCKER_TAG=${IMAGE_NAME_TAGS[0]}"
+
+###
+# Checking if the build is necessary,
+# meaning build only if one of those values changed:
+# - a new tag is beeing created
+# - base image digest
+# - netbox git ref (Label: netbox.git-ref)
+# - netbox-docker git ref (Label: org.opencontainers.image.revision)
+###
+# Load information from registry (only for first registry in "IMAGE_NAMES")
+SHOULD_BUILD="false"
+BUILD_REASON=""
+if [ -z "${GH_ACTION}" ]; then
   # Asuming non Github builds should always proceed
   SHOULD_BUILD="true"
   BUILD_REASON="${BUILD_REASON} interactive"
-    elif [ "$DOCKER_REGISTRY" = "docker.io" ]; then
-      source ./build-functions/get-public-image-config.sh
-      IFS=':' read -ra DOCKER_FROM_SPLIT <<<"${DOCKER_FROM}"
-      if ! [[ ${DOCKER_FROM_SPLIT[0]} =~ .*/.* ]]; then
-        # Need to use "library/..." for images the have no two part name
-        DOCKER_FROM_SPLIT[0]="library/${DOCKER_FROM_SPLIT[0]}"
-      fi
-      BASE_LAST_LAYER=$(get_image_last_layer "${DOCKER_FROM_SPLIT[0]}" "${DOCKER_FROM_SPLIT[1]}")
-      mapfile -t IMAGES_LAYERS_OLD < <(get_image_layers "${DOCKER_ORG}"/"${DOCKER_REPO}" "${TAG}")
-      NETBOX_GIT_REF_OLD=$(get_image_label netbox.git-ref "${DOCKER_ORG}"/"${DOCKER_REPO}" "${TAG}")
-      GIT_REF_OLD=$(get_image_label org.opencontainers.image.revision "${DOCKER_ORG}"/"${DOCKER_REPO}" "${TAG}")
-
-      if ! printf '%s\n' "${IMAGES_LAYERS_OLD[@]}" | grep -q -P "^${BASE_LAST_LAYER}\$"; then
+elif [ "false" == "$(check_if_tags_exists "${IMAGE_NAMES[0]}" "$TARGET_DOCKER_TAG")" ]; then
   SHOULD_BUILD="true"
-        BUILD_REASON="${BUILD_REASON} debian"
+  BUILD_REASON="${BUILD_REASON} newtag"
+else
+  echo "Checking labels for '${FINAL_DOCKER_TAG}'"
+  BASE_LAST_LAYER=$(get_image_last_layer "${DOCKER_FROM}")
+  OLD_BASE_LAST_LAYER=$(get_image_label netbox.last-base-image-layer "${FINAL_DOCKER_TAG}")
+  NETBOX_GIT_REF_OLD=$(get_image_label netbox.git-ref "${FINAL_DOCKER_TAG}")
+  GIT_REF_OLD=$(get_image_label org.opencontainers.image.revision "${FINAL_DOCKER_TAG}")
+
+  if [ "${BASE_LAST_LAYER}" != "${OLD_BASE_LAST_LAYER}" ]; then
+    SHOULD_BUILD="true"
+    BUILD_REASON="${BUILD_REASON} ubuntu"
   fi
   if [ "${NETBOX_GIT_REF}" != "${NETBOX_GIT_REF_OLD}" ]; then
     SHOULD_BUILD="true"
@@ -312,96 +339,120 @@ for DOCKER_TARGET in "${DOCKER_TARGETS[@]}"; do
     SHOULD_BUILD="true"
     BUILD_REASON="${BUILD_REASON} netbox-docker"
   fi
-    else
-      SHOULD_BUILD="true"
-      BUILD_REASON="${BUILD_REASON} no-check"
-    fi
-    ###
-    # Composing all arguments for `docker build`
-    ###
-    DOCKER_BUILD_ARGS=(
-      --pull
-      --target "${DOCKER_TARGET}"
-      -f "${DOCKERFILE}"
-      -t "${TARGET_DOCKER_TAG}"
-      -t "${TARGET_DOCKER_TAG_PROJECT}"
-    )
-    if [ -n "${TARGET_DOCKER_SHORT_TAG}" ]; then
-      DOCKER_BUILD_ARGS+=(-t "${TARGET_DOCKER_SHORT_TAG}")
-      DOCKER_BUILD_ARGS+=(-t "${TARGET_DOCKER_SHORT_TAG_PROJECT}")
-      DOCKER_BUILD_ARGS+=(-t "${TARGET_DOCKER_LATEST_TAG}")
-      DOCKER_BUILD_ARGS+=(-t "${TARGET_DOCKER_LATEST_TAG_PROJECT}")
-    fi
+fi
 
-    # --label
-    DOCKER_BUILD_ARGS+=(
+if [ "${SHOULD_BUILD}" != "true" ]; then
+  echo "Build skipped because sources didn't change"
+  gh_out "skipped=true"
+  exit 0 # Nothing to do -> exit
+else
+  gh_out "skipped=false"
+fi
+gh_echo "::endgroup::"
+
+if [ "${CHECK_ONLY}" = "true" ]; then
+  echo "Only check if build needed was requested. Exiting"
+  exit 0
+fi
+
+###
+# Build the image
+###
+gh_echo "::group::🏗 Building the image"
+###
+# Composing all arguments for `docker build`
+###
+DOCKER_BUILD_ARGS=(
+  --pull
+  --target main
+  -f "${DOCKERFILE}"
+)
+for IMAGE_NAME in "${IMAGE_NAME_TAGS[@]}"; do
+  DOCKER_BUILD_ARGS+=(-t "${IMAGE_NAME}")
+done
+
+# --label
+DOCKER_BUILD_ARGS+=(
   --label "netbox.original-tag=${TARGET_DOCKER_TAG_PROJECT}"
   --label "org.opencontainers.image.created=${BUILD_DATE}"
   --label "org.opencontainers.image.version=${PROJECT_VERSION}"
-    )
-    if [ -d ".git" ]; then
+)
+if [ -d ".git" ] && [ -z "${SKIP_GIT}" ]; then
   DOCKER_BUILD_ARGS+=(
     --label "org.opencontainers.image.revision=${GIT_REF}"
   )
-    fi
-    if [ -d "${NETBOX_PATH}/.git" ]; then
+fi
+if [ -d "${NETBOX_PATH}/.git" ] && [ -z "${SKIP_GIT}" ]; then
   DOCKER_BUILD_ARGS+=(
     --label "netbox.git-branch=${NETBOX_GIT_BRANCH}"
     --label "netbox.git-ref=${NETBOX_GIT_REF}"
     --label "netbox.git-url=${NETBOX_GIT_URL}"
   )
-    fi
-    if [ -n "${BUILD_REASON}" ]; then
+fi
+if [ -n "${BUILD_REASON}" ]; then
   BUILD_REASON=$(sed -e 's/^[[:space:]]*//' -e 's/[[:space:]]*$//' <<<"$BUILD_REASON")
   DOCKER_BUILD_ARGS+=(--label "netbox.build-reason=${BUILD_REASON}")
-    fi
+  DOCKER_BUILD_ARGS+=(--label "netbox.last-base-image-layer=${BASE_LAST_LAYER}")
+fi
 
-    # --build-arg
-    DOCKER_BUILD_ARGS+=(--build-arg "NETBOX_PATH=${NETBOX_PATH}")
+# --build-arg
+DOCKER_BUILD_ARGS+=(--build-arg "NETBOX_PATH=${NETBOX_PATH}")
 
-    if [ -n "${DOCKER_FROM}" ]; then
+if [ -n "${DOCKER_FROM}" ]; then
   DOCKER_BUILD_ARGS+=(--build-arg "FROM=${DOCKER_FROM}")
-    fi
-    # shellcheck disable=SC2031
-    if [ -n "${HTTP_PROXY}" ]; then
+fi
+# shellcheck disable=SC2031
+if [ -n "${HTTP_PROXY}" ]; then
   DOCKER_BUILD_ARGS+=(--build-arg "http_proxy=${HTTP_PROXY}")
   DOCKER_BUILD_ARGS+=(--build-arg "https_proxy=${HTTPS_PROXY}")
-    fi
-    if [ -n "${NO_PROXY}" ]; then
+fi
+if [ -n "${NO_PROXY}" ]; then
   DOCKER_BUILD_ARGS+=(--build-arg "no_proxy=${NO_PROXY}")
-    fi
+fi
 
-    ###
-    # Building the docker image
-    ###
-    if [ "${SHOULD_BUILD}" == "true" ]; then
-      echo "🐳 Building the Docker image '${TARGET_DOCKER_TAG_PROJECT}'."
-      echo "    Build reason set to: ${BUILD_REASON}"
-      $DRY docker build "${DOCKER_BUILD_ARGS[@]}" .
-      echo "✅ Finished building the Docker images '${TARGET_DOCKER_TAG_PROJECT}'"
-      echo "🔎 Inspecting labels on '${TARGET_DOCKER_TAG_PROJECT}'"
-      $DRY docker inspect "${TARGET_DOCKER_TAG_PROJECT}" --format "{{json .Config.Labels}}" | jq
-    else
-      echo "Build skipped because sources didn't change"
-      echo "::set-output name=skipped::true"
-    fi
-  fi
+DOCKER_BUILD_ARGS+=(--platform "${BUILDX_PLATFORM-linux/amd64}")
+if [ "${2}" == "--push" ]; then
+  # output type=docker does not work with pushing
+  DOCKER_BUILD_ARGS+=(
+    --output=type=image
+    --push
+  )
+else
+  DOCKER_BUILD_ARGS+=(
+    --output=type=docker
+  )
+fi
 
-  ###
-  # Pushing the docker images if either `--push` or `--push-only` are passed
-  ###
-  if [ "${2}" == "--push" ] || [ "${2}" == "--push-only" ]; then
-    source ./build-functions/docker-functions.sh
-    push_image_to_registry "${TARGET_DOCKER_TAG}"
-    push_image_to_registry "${TARGET_DOCKER_TAG_PROJECT}"
+###
+# Building the docker image
+###
+if [ -z "${BUILDX_BUILDER_NAME}" ]; then
+  BUILDX_BUILDER_NAME="$(basename "${PWD}")"
+fi
+if ! docker buildx ls | grep --quiet --word-regexp "${BUILDX_BUILDER_NAME}"; then
+  echo "👷  Creating new Buildx Builder '${BUILDX_BUILDER_NAME}'"
+  $DRY docker buildx create --name "${BUILDX_BUILDER_NAME}"
+  BUILDX_BUILDER_CREATED="yes"
+fi
 
-    if [ -n "${TARGET_DOCKER_SHORT_TAG}" ]; then
-      push_image_to_registry "${TARGET_DOCKER_SHORT_TAG}"
-      push_image_to_registry "${TARGET_DOCKER_SHORT_TAG_PROJECT}"
-      push_image_to_registry "${TARGET_DOCKER_LATEST_TAG}"
-      push_image_to_registry "${TARGET_DOCKER_LATEST_TAG_PROJECT}"
-    fi
-  fi
+echo "🐳 Building the Docker image '${TARGET_DOCKER_TAG_PROJECT}'."
+echo "    Build reason set to: ${BUILD_REASON}"
+$DRY docker buildx \
+  --builder "${BUILDX_BUILDER_NAME}" \
+  build \
+  "${DOCKER_BUILD_ARGS[@]}" \
+  .
+echo "✅ Finished building the Docker images"
+gh_echo "::endgroup::" # End group for Build
 
-  gh_echo "::endgroup::"
-done
+gh_echo "::group::🏗 Image Labels"
+echo "🔎 Inspecting labels on '${IMAGE_NAME_TAGS[0]}'"
+$DRY docker inspect "${IMAGE_NAME_TAGS[0]}" --format "{{json .Config.Labels}}" | jq
+gh_echo "::endgroup::"
+
+gh_echo "::group::🏗 Clean up"
+if [ -n "${BUILDX_REMOVE_BUILDER}" ] && [ "${BUILDX_BUILDER_CREATED}" == "yes" ]; then
+  echo "👷  Removing Buildx Builder '${BUILDX_BUILDER_NAME}'"
+  $DRY docker buildx rm "${BUILDX_BUILDER_NAME}"
+fi
+gh_echo "::endgroup::"

configuration/configuration.py

@@ -7,12 +7,17 @@
 import re
 from os import environ
 from os.path import abspath, dirname, join
+from typing import Any, Callable, Tuple
 
-# For reference see https://netbox.readthedocs.io/en/stable/configuration/
-# Based on https://github.com/netbox-community/netbox/blob/master/netbox/netbox/configuration.example.py
+# For reference see https://docs.netbox.dev/en/stable/configuration/
+# Based on https://github.com/netbox-community/netbox/blob/develop/netbox/netbox/configuration_example.py
+
+###
+# NetBox-Docker Helper functions
+###
 
 # Read secret from file
-def _read_secret(secret_name, default = None):
+def _read_secret(secret_name: str, default: str | None = None) -> str | None:
     try:
         f = open('/run/secrets/' + secret_name, 'r', encoding='utf-8')
     except EnvironmentError:
@@ -21,6 +26,25 @@ def _read_secret(secret_name, default = None):
         with f:
             return f.readline().strip()
 
+# If the `map_fn` isn't defined, then the value that is read from the environment (or the default value if not found) is returned.
+# If the `map_fn` is defined, then `map_fn` is invoked and the value (that was read from the environment or the default value if not found)
+# is passed to it as a parameter. The value returned from `map_fn` is then the return value of this function.
+# The `map_fn` is not invoked, if the value (that was read from the environment or the default value if not found) is None.
+def _environ_get_and_map(variable_name: str, default: str | None = None, map_fn: Callable[[str], Any | None] = None) -> Any | None:
+    env_value = environ.get(variable_name, default)
+
+    if env_value == None:
+        return env_value
+
+    if not map_fn:
+        return env_value
+    
+    return map_fn(env_value)
+
+_AS_BOOL = lambda value : value.lower() == 'true'
+_AS_INT = lambda value : int(value)
+_AS_LIST = lambda value : list(filter(None, value.split(' ')))
+
 _BASE_DIR = dirname(dirname(abspath(__file__)))
 
 #########################
@@ -34,10 +58,14 @@ _BASE_DIR = dirname(dirname(abspath(__file__)))
 #
 # Example: ALLOWED_HOSTS = ['netbox.example.com', 'netbox.internal.local']
 ALLOWED_HOSTS = environ.get('ALLOWED_HOSTS', '*').split(' ')
+# ensure that '*' or 'localhost' is always in ALLOWED_HOSTS (needed for health checks)
+if '*' not in ALLOWED_HOSTS and 'localhost' not in ALLOWED_HOSTS:
+    ALLOWED_HOSTS.append('localhost')
 
 # PostgreSQL database configuration. See the Django documentation for a complete list of available parameters:
 #   https://docs.djangoproject.com/en/stable/ref/settings/#databases
-DATABASE = {
+DATABASES = {
+    'default': {
         'NAME': environ.get('DB_NAME', 'netbox'),       # Database name
         'USER': environ.get('DB_USER', ''),             # PostgreSQL username
         'PASSWORD': _read_secret('db_password', environ.get('DB_PASSWORD', '')),
@@ -46,10 +74,11 @@ DATABASE = {
         'PORT': environ.get('DB_PORT', ''),             # Database port (leave blank for default)
         'OPTIONS': {'sslmode': environ.get('DB_SSLMODE', 'prefer')},
                                                         # Database connection SSLMODE
-    'CONN_MAX_AGE': int(environ.get('DB_CONN_MAX_AGE', '300')),
+        'CONN_MAX_AGE': _environ_get_and_map('DB_CONN_MAX_AGE', '300', _AS_INT),
                                                         # Max database connection age
-    'DISABLE_SERVER_SIDE_CURSORS': environ.get('DB_DISABLE_SERVER_SIDE_CURSORS', 'False').lower() == 'true',
+        'DISABLE_SERVER_SIDE_CURSORS': _environ_get_and_map('DB_DISABLE_SERVER_SIDE_CURSORS', 'False', _AS_BOOL),
                                                         # Disable the use of server-side cursors transaction pooling
+    }
 }
 
 # Redis database settings. Redis is used for caching and for queuing background tasks such as webhook events. A separate
@@ -58,19 +87,26 @@ DATABASE = {
 REDIS = {
     'tasks': {
         'HOST': environ.get('REDIS_HOST', 'localhost'),
-        'PORT': int(environ.get('REDIS_PORT', 6379)),
+        'PORT': _environ_get_and_map('REDIS_PORT', 6379, _AS_INT),
+        'SENTINELS': [tuple(uri.split(':')) for uri in _environ_get_and_map('REDIS_SENTINELS', '', _AS_LIST) if uri != ''],
+        'SENTINEL_SERVICE': environ.get('REDIS_SENTINEL_SERVICE', 'default'),
+        'SENTINEL_TIMEOUT': _environ_get_and_map('REDIS_SENTINEL_TIMEOUT', 10, _AS_INT),
+        'USERNAME': environ.get('REDIS_USERNAME', ''),
         'PASSWORD': _read_secret('redis_password', environ.get('REDIS_PASSWORD', '')),
-        'DATABASE': int(environ.get('REDIS_DATABASE', 0)),
-        'SSL': environ.get('REDIS_SSL', 'False').lower() == 'true',
-        'INSECURE_SKIP_TLS_VERIFY': environ.get('REDIS_INSECURE_SKIP_TLS_VERIFY', 'False').lower() == 'true',
+        'DATABASE': _environ_get_and_map('REDIS_DATABASE', 0, _AS_INT),
+        'SSL': _environ_get_and_map('REDIS_SSL', 'False', _AS_BOOL),
+        'INSECURE_SKIP_TLS_VERIFY': _environ_get_and_map('REDIS_INSECURE_SKIP_TLS_VERIFY', 'False', _AS_BOOL),
     },
     'caching': {
         'HOST': environ.get('REDIS_CACHE_HOST', environ.get('REDIS_HOST', 'localhost')),
-        'PORT': int(environ.get('REDIS_CACHE_PORT', environ.get('REDIS_PORT', 6379))),
+        'PORT': _environ_get_and_map('REDIS_CACHE_PORT', environ.get('REDIS_PORT', '6379'), _AS_INT),
+        'SENTINELS': [tuple(uri.split(':')) for uri in _environ_get_and_map('REDIS_CACHE_SENTINELS', '', _AS_LIST) if uri != ''],
+        'SENTINEL_SERVICE': environ.get('REDIS_CACHE_SENTINEL_SERVICE', environ.get('REDIS_SENTINEL_SERVICE', 'default')),
+        'USERNAME': environ.get('REDIS_CACHE_USERNAME', environ.get('REDIS_USERNAME', '')),
         'PASSWORD': _read_secret('redis_cache_password', environ.get('REDIS_CACHE_PASSWORD', environ.get('REDIS_PASSWORD', ''))),
-        'DATABASE': int(environ.get('REDIS_CACHE_DATABASE', 1)),
-        'SSL': environ.get('REDIS_CACHE_SSL', environ.get('REDIS_SSL', 'False')).lower() == 'true',
-        'INSECURE_SKIP_TLS_VERIFY': environ.get('REDIS_CACHE_INSECURE_SKIP_TLS_VERIFY', environ.get('REDIS_INSECURE_SKIP_TLS_VERIFY', 'False')).lower() == 'true',
+        'DATABASE': _environ_get_and_map('REDIS_CACHE_DATABASE', '1', _AS_INT),
+        'SSL': _environ_get_and_map('REDIS_CACHE_SSL', environ.get('REDIS_SSL', 'False'), _AS_BOOL),
+        'INSECURE_SKIP_TLS_VERIFY': _environ_get_and_map('REDIS_CACHE_INSECURE_SKIP_TLS_VERIFY', environ.get('REDIS_INSECURE_SKIP_TLS_VERIFY', 'False'), _AS_BOOL),
     },
 }
 
@@ -80,6 +116,11 @@ REDIS = {
 # https://docs.djangoproject.com/en/stable/ref/settings/#std:setting-SECRET_KEY
 SECRET_KEY = _read_secret('secret_key', environ.get('SECRET_KEY', ''))
 
+API_TOKEN_PEPPERS = {}
+if api_token_pepper := _read_secret('api_token_pepper_1', environ.get('API_TOKEN_PEPPER_1', '')):
+    API_TOKEN_PEPPERS.update({1: api_token_pepper})
+
+
 
 #########################
 #                       #
@@ -87,170 +128,232 @@ SECRET_KEY = _read_secret('secret_key', environ.get('SECRET_KEY', ''))
 #                       #
 #########################
 
-# Specify one or more name and email address tuples representing NetBox administrators. These people will be notified of
-# application errors (assuming correct email settings are provided).
-ADMINS = [
-    # ['John Doe', 'jdoe@example.com'],
-]
+# # Specify one or more name and email address tuples representing NetBox administrators. These people will be notified of
+# # application errors (assuming correct email settings are provided).
+# ADMINS = [
+#    # ['John Doe', 'jdoe@example.com'],
+# ]
 
-# URL schemes that are allowed within links in NetBox
-ALLOWED_URL_SCHEMES = (
-    'file', 'ftp', 'ftps', 'http', 'https', 'irc', 'mailto', 'sftp', 'ssh', 'tel', 'telnet', 'tftp', 'vnc', 'xmpp',
-)
+if 'ALLOWED_URL_SCHEMES' in environ:
+    ALLOWED_URL_SCHEMES = _environ_get_and_map('ALLOWED_URL_SCHEMES', None, _AS_LIST)
 
 # Optionally display a persistent banner at the top and/or bottom of every page. HTML is allowed. To display the same
 # content in both banners, define BANNER_TOP and set BANNER_BOTTOM = BANNER_TOP.
-BANNER_TOP = environ.get('BANNER_TOP', '')
-BANNER_BOTTOM = environ.get('BANNER_BOTTOM', '')
+if 'BANNER_TOP' in environ:
+    BANNER_TOP = environ.get('BANNER_TOP', None)
+if 'BANNER_BOTTOM' in environ:
+    BANNER_BOTTOM = environ.get('BANNER_BOTTOM', None)
 
 # Text to include on the login page above the login form. HTML is allowed.
-BANNER_LOGIN = environ.get('BANNER_LOGIN', '')
-
-# Base URL path if accessing NetBox within a directory. For example, if installed at http://example.com/netbox/, set:
-# BASE_PATH = 'netbox/'
-BASE_PATH = environ.get('BASE_PATH', '')
+if 'BANNER_LOGIN' in environ:
+    BANNER_LOGIN = environ.get('BANNER_LOGIN', None)
 
 # Maximum number of days to retain logged changes. Set to 0 to retain changes indefinitely. (Default: 90)
-CHANGELOG_RETENTION = int(environ.get('CHANGELOG_RETENTION', 90))
+if 'CHANGELOG_RETENTION' in environ:
+    CHANGELOG_RETENTION = _environ_get_and_map('CHANGELOG_RETENTION', None, _AS_INT)
+
+# Maximum number of days to retain job results (scripts and reports). Set to 0 to retain job results in the database indefinitely. (Default: 90)
+if 'JOB_RETENTION' in environ:
+    JOB_RETENTION = _environ_get_and_map('JOB_RETENTION', None, _AS_INT)
+# JOBRESULT_RETENTION was renamed to JOB_RETENTION in the v3.5.0 release of NetBox. For backwards compatibility, map JOBRESULT_RETENTION to JOB_RETENTION
+elif 'JOBRESULT_RETENTION' in environ:
+    JOB_RETENTION = _environ_get_and_map('JOBRESULT_RETENTION', None, _AS_INT)
 
 # API Cross-Origin Resource Sharing (CORS) settings. If CORS_ORIGIN_ALLOW_ALL is set to True, all origins will be
 # allowed. Otherwise, define a list of allowed origins using either CORS_ORIGIN_WHITELIST or
 # CORS_ORIGIN_REGEX_WHITELIST. For more information, see https://github.com/ottoyiu/django-cors-headers
-CORS_ORIGIN_ALLOW_ALL = environ.get('CORS_ORIGIN_ALLOW_ALL', 'False').lower() == 'true'
-CORS_ORIGIN_WHITELIST = list(filter(None, environ.get('CORS_ORIGIN_WHITELIST', 'https://localhost').split(' ')))
-CORS_ORIGIN_REGEX_WHITELIST = [re.compile(r) for r in list(filter(None, environ.get('CORS_ORIGIN_REGEX_WHITELIST', '').split(' ')))]
-
-# Cross-Site-Request-Forgery-Attack settings. If Netbox is sitting behind a reverse proxy, you might need to set the CSRF_TRUSTED_ORIGINS flag.
-# Django 4.0 requires to specify the URL Scheme in this setting. An example environment variable could be specified like:
-# CSRF_TRUSTED_ORIGINS=https://demo.netbox.dev http://demo.netbox.dev
-CSRF_TRUSTED_ORIGINS = list(filter(None, environ.get('CSRF_TRUSTED_ORIGINS', '').split(' ')))
+CORS_ORIGIN_ALLOW_ALL = _environ_get_and_map('CORS_ORIGIN_ALLOW_ALL', 'False', _AS_BOOL)
+CORS_ORIGIN_WHITELIST = _environ_get_and_map('CORS_ORIGIN_WHITELIST', 'https://localhost', _AS_LIST)
+CORS_ORIGIN_REGEX_WHITELIST = [re.compile(r) for r in _environ_get_and_map('CORS_ORIGIN_REGEX_WHITELIST', '', _AS_LIST)]
 
 # Set to True to enable server debugging. WARNING: Debugging introduces a substantial performance penalty and may reveal
-# sensitive information about your installation. Only enable debugging while performing testing. Never enable debugging
-# on a production system.
-DEBUG = environ.get('DEBUG', 'False').lower() == 'true'
+# sensitive information about your installation. Only enable debugging while performing testing.
+# Never enable debugging on a production system.
+DEBUG = _environ_get_and_map('DEBUG', 'False', _AS_BOOL)
+
+# This parameter serves as a safeguard to prevent some potentially dangerous behavior,
+# such as generating new database schema migrations.
+# Set this to True only if you are actively developing the NetBox code base.
+DEVELOPER = _environ_get_and_map('DEVELOPER', 'False', _AS_BOOL)
 
 # Email settings
 EMAIL = {
     'SERVER': environ.get('EMAIL_SERVER', 'localhost'),
-    'PORT': int(environ.get('EMAIL_PORT', 25)),
+    'PORT': _environ_get_and_map('EMAIL_PORT', 25, _AS_INT),
     'USERNAME': environ.get('EMAIL_USERNAME', ''),
     'PASSWORD': _read_secret('email_password', environ.get('EMAIL_PASSWORD', '')),
-    'USE_SSL': environ.get('EMAIL_USE_SSL', 'False').lower() == 'true',
-    'USE_TLS': environ.get('EMAIL_USE_TLS', 'False').lower() == 'true',
+    'USE_SSL': _environ_get_and_map('EMAIL_USE_SSL', 'False', _AS_BOOL),
+    'USE_TLS': _environ_get_and_map('EMAIL_USE_TLS', 'False', _AS_BOOL),
     'SSL_CERTFILE': environ.get('EMAIL_SSL_CERTFILE', ''),
     'SSL_KEYFILE': environ.get('EMAIL_SSL_KEYFILE', ''),
-    'TIMEOUT': int(environ.get('EMAIL_TIMEOUT', 10)),  # seconds
+    'TIMEOUT': _environ_get_and_map('EMAIL_TIMEOUT', 10, _AS_INT),  # seconds
     'FROM_EMAIL': environ.get('EMAIL_FROM', ''),
 }
 
 # Enforcement of unique IP space can be toggled on a per-VRF basis. To enforce unique IP space within the global table
 # (all prefixes and IP addresses not assigned to a VRF), set ENFORCE_GLOBAL_UNIQUE to True.
-ENFORCE_GLOBAL_UNIQUE = environ.get('ENFORCE_GLOBAL_UNIQUE', 'False').lower() == 'true'
+if 'ENFORCE_GLOBAL_UNIQUE' in environ:
+    ENFORCE_GLOBAL_UNIQUE = _environ_get_and_map('ENFORCE_GLOBAL_UNIQUE', None, _AS_BOOL)
+
+# By default, netbox sends census reporting data using a single HTTP request each time a worker starts.
+# This data enables the project maintainers to estimate how many NetBox deployments exist and track the adoption of new versions over time.
+# The only data reported by this function are the NetBox version, Python version, and a pseudorandom unique identifier.
+# To opt out of census reporting, set CENSUS_REPORTING_ENABLED to False.
+if 'CENSUS_REPORTING_ENABLED' in environ:
+    CENSUS_REPORTING_ENABLED = _environ_get_and_map('CENSUS_REPORTING_ENABLED', None, _AS_BOOL)
 
 # Exempt certain models from the enforcement of view permissions. Models listed here will be viewable by all users and
 # by anonymous users. List models in the form `<app>.<model>`. Add '*' to this list to exempt all models.
-EXEMPT_VIEW_PERMISSIONS = list(filter(None, environ.get('EXEMPT_VIEW_PERMISSIONS', '').split(' ')))
+EXEMPT_VIEW_PERMISSIONS = _environ_get_and_map('EXEMPT_VIEW_PERMISSIONS', '', _AS_LIST)
+
+# HTTP proxies NetBox should use when sending outbound HTTP requests (e.g. for webhooks).
+HTTP_PROXIES = {
+    'http': environ.get('HTTP_PROXY', None),
+    'https': environ.get('HTTPS_PROXY', None),
+}
+
+# IP addresses recognized as internal to the system. The debugging toolbar will be available only to clients accessing
+# NetBox from an internal IP.
+INTERNAL_IPS = _environ_get_and_map('INTERNAL_IPS', '127.0.0.1 ::1', _AS_LIST)
 
 # Enable GraphQL API.
-GRAPHQL_ENABLED = environ.get('GRAPHQL_ENABLED', 'True').lower() == 'true'
+if 'GRAPHQL_ENABLED' in environ:
+    GRAPHQL_ENABLED = _environ_get_and_map('GRAPHQL_ENABLED', None, _AS_BOOL)
 
-# Enable custom logging. Please see the Django documentation for detailed guidance on configuring custom logs:
-#   https://docs.djangoproject.com/en/stable/topics/logging/
-LOGGING = {}
+# # Enable custom logging. Please see the Django documentation for detailed guidance on configuring custom logs:
+# #   https://docs.djangoproject.com/en/stable/topics/logging/
+# LOGGING = {}
 
-# Setting this to True will permit only authenticated users to access any part of NetBox. By default, anonymous users
-# are permitted to access most data in NetBox (excluding secrets) but not make any changes.
-LOGIN_REQUIRED = environ.get('LOGIN_REQUIRED', 'False').lower() == 'true'
+# Automatically reset the lifetime of a valid session upon each authenticated request. Enables users to remain
+# authenticated to NetBox indefinitely.
+LOGIN_PERSISTENCE = _environ_get_and_map('LOGIN_PERSISTENCE', 'False', _AS_BOOL)
+
+# When enabled, only authenticated users are permitted to access any part of NetBox.
+# Disabling this will allow unauthenticated users to access most areas of NetBox (but not make any changes).
+LOGIN_REQUIRED = _environ_get_and_map('LOGIN_REQUIRED', 'True', _AS_BOOL)
 
 # The length of time (in seconds) for which a user will remain logged into the web UI before being prompted to
 # re-authenticate. (Default: 1209600 [14 days])
-LOGIN_TIMEOUT = int(environ.get('LOGIN_TIMEOUT', 1209600))
+LOGIN_TIMEOUT = _environ_get_and_map('LOGIN_TIMEOUT', 1209600, _AS_INT)
 
 # Setting this to True will display a "maintenance mode" banner at the top of every page.
-MAINTENANCE_MODE = environ.get('MAINTENANCE_MODE', 'False').lower() == 'true'
+if 'MAINTENANCE_MODE' in environ:
+    MAINTENANCE_MODE = _environ_get_and_map('MAINTENANCE_MODE', None, _AS_BOOL)
 
 # Maps provider
-MAPS_URL = environ.get('MAPS_URL', None)
+if 'MAPS_URL' in environ:
+    MAPS_URL = environ.get('MAPS_URL', None)
 
 # An API consumer can request an arbitrary number of objects =by appending the "limit" parameter to the URL (e.g.
 # "?limit=1000"). This setting defines the maximum limit. Setting it to 0 or None will allow an API consumer to request
 # all objects by specifying "?limit=0".
-MAX_PAGE_SIZE = int(environ.get('MAX_PAGE_SIZE', 1000))
+if 'MAX_PAGE_SIZE' in environ:
+    MAX_PAGE_SIZE = _environ_get_and_map('MAX_PAGE_SIZE', None, _AS_INT)
 
 # The file path where uploaded media such as image attachments are stored. A trailing slash is not needed. Note that
 # the default value of this setting is derived from the installed location.
 MEDIA_ROOT = environ.get('MEDIA_ROOT', join(_BASE_DIR, 'media'))
 
 # Expose Prometheus monitoring metrics at the HTTP endpoint '/metrics'
-METRICS_ENABLED = environ.get('METRICS_ENABLED', 'False').lower() == 'true'
-
-# Credentials that NetBox will uses to authenticate to devices when connecting via NAPALM.
-NAPALM_USERNAME = environ.get('NAPALM_USERNAME', '')
-NAPALM_PASSWORD = _read_secret('napalm_password', environ.get('NAPALM_PASSWORD', ''))
-
-# NAPALM timeout (in seconds). (Default: 30)
-NAPALM_TIMEOUT = int(environ.get('NAPALM_TIMEOUT', 30))
-
-# NAPALM optional arguments (see http://napalm.readthedocs.io/en/latest/support/#optional-arguments). Arguments must
-# be provided as a dictionary.
-NAPALM_ARGS = {}
+METRICS_ENABLED = _environ_get_and_map('METRICS_ENABLED', 'False', _AS_BOOL)
 
 # Determine how many objects to display per page within a list. (Default: 50)
-PAGINATE_COUNT = int(environ.get('PAGINATE_COUNT', 50))
+if 'PAGINATE_COUNT' in environ:
+    PAGINATE_COUNT = _environ_get_and_map('PAGINATE_COUNT', None, _AS_INT)
 
-# Enable installed plugins. Add the name of each plugin to the list.
-PLUGINS = []
+# # Enable installed plugins. Add the name of each plugin to the list.
+# PLUGINS = []
 
-# Plugins configuration settings. These settings are used by various plugins that the user may have installed.
-# Each key in the dictionary is the name of an installed plugin and its value is a dictionary of settings.
-PLUGINS_CONFIG = {
-}
+# # Plugins configuration settings. These settings are used by various plugins that the user may have installed.
+# # Each key in the dictionary is the name of an installed plugin and its value is a dictionary of settings.
+# PLUGINS_CONFIG = {
+# }
 
 # When determining the primary IP address for a device, IPv6 is preferred over IPv4 by default. Set this to True to
 # prefer IPv4 instead.
-PREFER_IPV4 = environ.get('PREFER_IPV4', 'False').lower() == 'true'
+if 'PREFER_IPV4' in environ:
+    PREFER_IPV4 = _environ_get_and_map('PREFER_IPV4', None, _AS_BOOL)
+
+# The default value for the amperage field when creating new power feeds.
+if 'POWERFEED_DEFAULT_AMPERAGE' in environ:
+    POWERFEED_DEFAULT_AMPERAGE = _environ_get_and_map('POWERFEED_DEFAULT_AMPERAGE', None, _AS_INT)
+
+# The default value (percentage) for the max_utilization field when creating new power feeds.
+if 'POWERFEED_DEFAULT_MAX_UTILIZATION' in environ:
+    POWERFEED_DEFAULT_MAX_UTILIZATION = _environ_get_and_map('POWERFEED_DEFAULT_MAX_UTILIZATION', None, _AS_INT)
+
+# The default value for the voltage field when creating new power feeds.
+if 'POWERFEED_DEFAULT_VOLTAGE' in environ:
+    POWERFEED_DEFAULT_VOLTAGE = _environ_get_and_map('POWERFEED_DEFAULT_VOLTAGE', None, _AS_INT)
 
 # Rack elevation size defaults, in pixels. For best results, the ratio of width to height should be roughly 10:1.
-RACK_ELEVATION_DEFAULT_UNIT_HEIGHT = int(environ.get('RACK_ELEVATION_DEFAULT_UNIT_HEIGHT', 22))
-RACK_ELEVATION_DEFAULT_UNIT_WIDTH = int(environ.get('RACK_ELEVATION_DEFAULT_UNIT_WIDTH', 220))
+if 'RACK_ELEVATION_DEFAULT_UNIT_HEIGHT' in environ:
+    RACK_ELEVATION_DEFAULT_UNIT_HEIGHT = _environ_get_and_map('RACK_ELEVATION_DEFAULT_UNIT_HEIGHT', None, _AS_INT)
+if 'RACK_ELEVATION_DEFAULT_UNIT_WIDTH' in environ:
+    RACK_ELEVATION_DEFAULT_UNIT_WIDTH = _environ_get_and_map('RACK_ELEVATION_DEFAULT_UNIT_WIDTH', None, _AS_INT)
 
 # Remote authentication support
-REMOTE_AUTH_ENABLED = environ.get('REMOTE_AUTH_ENABLED', 'False').lower() == 'true'
-REMOTE_AUTH_BACKEND = environ.get('REMOTE_AUTH_BACKEND', 'netbox.authentication.RemoteUserBackend')
+REMOTE_AUTH_AUTO_CREATE_GROUPS = _environ_get_and_map('REMOTE_AUTH_AUTO_CREATE_GROUPS', 'False', _AS_BOOL)
+REMOTE_AUTH_AUTO_CREATE_USER = _environ_get_and_map('REMOTE_AUTH_AUTO_CREATE_USER', 'False', _AS_BOOL)
+REMOTE_AUTH_BACKEND = _environ_get_and_map('REMOTE_AUTH_BACKEND', 'netbox.authentication.RemoteUserBackend', _AS_LIST)
+REMOTE_AUTH_DEFAULT_GROUPS = _environ_get_and_map('REMOTE_AUTH_DEFAULT_GROUPS', '', _AS_LIST)
+# REMOTE_AUTH_DEFAULT_PERMISSIONS = {} # dicts can't be configured via environment variables. See extra.py instead.
+REMOTE_AUTH_ENABLED = _environ_get_and_map('REMOTE_AUTH_ENABLED', 'False', _AS_BOOL)
+REMOTE_AUTH_GROUP_HEADER = _environ_get_and_map('REMOTE_AUTH_GROUP_HEADER', 'HTTP_REMOTE_USER_GROUP')
+REMOTE_AUTH_GROUP_SEPARATOR = _environ_get_and_map('REMOTE_AUTH_GROUP_SEPARATOR', '|')
+REMOTE_AUTH_GROUP_SYNC_ENABLED = _environ_get_and_map('REMOTE_AUTH_GROUP_SYNC_ENABLED', 'False', _AS_BOOL)
 REMOTE_AUTH_HEADER = environ.get('REMOTE_AUTH_HEADER', 'HTTP_REMOTE_USER')
-REMOTE_AUTH_AUTO_CREATE_USER = environ.get('REMOTE_AUTH_AUTO_CREATE_USER', 'True').lower() == 'true'
-REMOTE_AUTH_DEFAULT_GROUPS = list(filter(None, environ.get('REMOTE_AUTH_DEFAULT_GROUPS', '').split(' ')))
+REMOTE_AUTH_USER_EMAIL = environ.get('REMOTE_AUTH_USER_EMAIL', 'HTTP_REMOTE_USER_EMAIL')
+REMOTE_AUTH_USER_FIRST_NAME = environ.get('REMOTE_AUTH_USER_FIRST_NAME', 'HTTP_REMOTE_USER_FIRST_NAME')
+REMOTE_AUTH_USER_LAST_NAME = environ.get('REMOTE_AUTH_USER_LAST_NAME', 'HTTP_REMOTE_USER_LAST_NAME')
+REMOTE_AUTH_SUPERUSER_GROUPS = _environ_get_and_map('REMOTE_AUTH_SUPERUSER_GROUPS', '', _AS_LIST)
+REMOTE_AUTH_SUPERUSERS = _environ_get_and_map('REMOTE_AUTH_SUPERUSERS', '', _AS_LIST)
+REMOTE_AUTH_STAFF_GROUPS = _environ_get_and_map('REMOTE_AUTH_STAFF_GROUPS', '', _AS_LIST)
+REMOTE_AUTH_STAFF_USERS = _environ_get_and_map('REMOTE_AUTH_STAFF_USERS', '', _AS_LIST)
 
 # This repository is used to check whether there is a new release of NetBox available. Set to None to disable the
 # version check or use the URL below to check for release in the official NetBox repository.
-# https://api.github.com/repos/netbox-community/netbox/releases
 RELEASE_CHECK_URL = environ.get('RELEASE_CHECK_URL', None)
-
-# The file path where custom reports will be stored. A trailing slash is not needed. Note that the default value of
-# this setting is derived from the installed location.
-REPORTS_ROOT = environ.get('REPORTS_ROOT', '/etc/netbox/reports')
+# RELEASE_CHECK_URL = 'https://api.github.com/repos/netbox-community/netbox/releases'
 
 # Maximum execution time for background tasks, in seconds.
-RQ_DEFAULT_TIMEOUT = int(environ.get('RQ_DEFAULT_TIMEOUT', 300))
+RQ_DEFAULT_TIMEOUT = _environ_get_and_map('RQ_DEFAULT_TIMEOUT', 300, _AS_INT)
 
-# The file path where custom scripts will be stored. A trailing slash is not needed. Note that the default value of
-# this setting is derived from the installed location.
-SCRIPTS_ROOT = environ.get('SCRIPTS_ROOT', '/etc/netbox/scripts')
+# The name to use for the csrf token cookie.
+CSRF_COOKIE_NAME = environ.get('CSRF_COOKIE_NAME', 'csrftoken')
+
+# Cross-Site-Request-Forgery-Attack settings. If Netbox is sitting behind a reverse proxy, you might need to set the CSRF_TRUSTED_ORIGINS flag.
+# Django 4.0 requires to specify the URL Scheme in this setting. An example environment variable could be specified like:
+# CSRF_TRUSTED_ORIGINS=https://demo.netbox.dev http://demo.netbox.dev
+CSRF_TRUSTED_ORIGINS = _environ_get_and_map('CSRF_TRUSTED_ORIGINS', '', _AS_LIST)
+
+# The name to use for the session cookie.
+SESSION_COOKIE_NAME = environ.get('SESSION_COOKIE_NAME', 'sessionid')
+
+# If true, the `includeSubDomains` directive will be included in the HTTP Strict Transport Security (HSTS) header.
+# This directive instructs the browser to apply the HSTS policy to all subdomains of the current domain.
+SECURE_HSTS_INCLUDE_SUBDOMAINS = _environ_get_and_map('SECURE_HSTS_INCLUDE_SUBDOMAINS', 'False', _AS_BOOL)
+
+# If true, the `preload` directive will be included in the HTTP Strict Transport Security (HSTS) header.
+# This directive instructs the browser to preload the site in HTTPS. Browsers that use the HSTS preload list will force the
+# site to be accessed via HTTPS even if the user types HTTP in the address bar.
+SECURE_HSTS_PRELOAD = _environ_get_and_map('SECURE_HSTS_PRELOAD', 'False', _AS_BOOL)
+
+# If set to a non-zero integer value, the SecurityMiddleware sets the HTTP Strict Transport Security (HSTS) header on all
+# responses that do not already have it. This will instruct the browser that the website must be accessed via HTTPS,
+# blocking any HTTP request.
+SECURE_HSTS_SECONDS = _environ_get_and_map('SECURE_HSTS_SECONDS', 0, _AS_INT)
+
+# If true, all non-HTTPS requests will be automatically redirected to use HTTPS.
+SECURE_SSL_REDIRECT = _environ_get_and_map('SECURE_SSL_REDIRECT', 'False', _AS_BOOL)
 
 # By default, NetBox will store session data in the database. Alternatively, a file path can be specified here to use
 # local file storage instead. (This can be useful for enabling authentication on a standby instance with read-only
 # database access.) Note that the user as which NetBox runs must have read and write permissions to this path.
-SESSION_FILE_PATH = environ.get('SESSIONS_ROOT', None)
+SESSION_FILE_PATH = environ.get('SESSION_FILE_PATH', environ.get('SESSIONS_ROOT', None))
 
 # Time zone (default: UTC)
 TIME_ZONE = environ.get('TIME_ZONE', 'UTC')
 
-# Date/time formatting. See the following link for supported formats:
-# https://docs.djangoproject.com/en/stable/ref/templates/builtins/#date
-DATE_FORMAT = environ.get('DATE_FORMAT', 'N j, Y')
-SHORT_DATE_FORMAT = environ.get('SHORT_DATE_FORMAT', 'Y-m-d')
-TIME_FORMAT = environ.get('TIME_FORMAT', 'g:i a')
-SHORT_TIME_FORMAT = environ.get('SHORT_TIME_FORMAT', 'H:i:s')
-DATETIME_FORMAT = environ.get('DATETIME_FORMAT', 'N j, Y g:i a')
-SHORT_DATETIME_FORMAT = environ.get('SHORT_DATETIME_FORMAT', 'Y-m-d H:i')
+# If true disables miscellaneous functionality which depends on access to the Internet.
+ISOLATED_DEPLOYMENT = _environ_get_and_map('ISOLATED_DEPLOYMENT', 'False', _AS_BOOL)

configuration/extra.py

@@ -15,12 +15,6 @@
 #     'file', 'ftp', 'ftps', 'http', 'https', 'irc', 'mailto', 'sftp', 'ssh', 'tel', 'telnet', 'tftp', 'vnc', 'xmpp',
 # )
 
-
-## NAPALM optional arguments (see http://napalm.readthedocs.io/en/latest/support/#optional-arguments). Arguments must
-## be provided as a dictionary.
-# NAPALM_ARGS = {}
-
-
 ## Enable installed plugins. Add the name of each plugin to the list.
 # from netbox.configuration.configuration import PLUGINS
 # PLUGINS.append('my_plugin')

configuration/ldap/ldap_config.py

@@ -31,9 +31,12 @@ AUTH_LDAP_CONNECTION_OPTIONS = {
     ldap.OPT_REFERRALS: 0
 }
 
-# Set the DN and password for the NetBox service account.
-AUTH_LDAP_BIND_DN = environ.get('AUTH_LDAP_BIND_DN', '')
-AUTH_LDAP_BIND_PASSWORD = _read_secret('auth_ldap_bind_password', environ.get('AUTH_LDAP_BIND_PASSWORD', ''))
+AUTH_LDAP_BIND_AS_AUTHENTICATING_USER = environ.get('AUTH_LDAP_BIND_AS_AUTHENTICATING_USER', 'False').lower() == 'true'
+
+# Set the DN and password for the NetBox service account if needed.
+if not AUTH_LDAP_BIND_AS_AUTHENTICATING_USER:
+    AUTH_LDAP_BIND_DN = environ.get('AUTH_LDAP_BIND_DN', '')
+    AUTH_LDAP_BIND_PASSWORD = _read_secret('auth_ldap_bind_password', environ.get('AUTH_LDAP_BIND_PASSWORD', ''))
 
 # Set a string template that describes any user’s distinguished name based on the username.
 AUTH_LDAP_USER_DN_TEMPLATE = environ.get('AUTH_LDAP_USER_DN_TEMPLATE', None)
@@ -46,20 +49,38 @@ AUTH_LDAP_START_TLS = environ.get('AUTH_LDAP_START_TLS', 'False').lower() == 'tr
 #     ldap.set_option(ldap.OPT_X_TLS_REQUIRE_CERT, ldap.OPT_X_TLS_NEVER)
 LDAP_IGNORE_CERT_ERRORS = environ.get('LDAP_IGNORE_CERT_ERRORS', 'False').lower() == 'true'
 
+# Include this setting if you want to validate the LDAP server certificates against a CA certificate directory on your server
+# Note that this is a NetBox-specific setting which sets:
+#     ldap.set_option(ldap.OPT_X_TLS_CACERTDIR, LDAP_CA_CERT_DIR)
+LDAP_CA_CERT_DIR = environ.get('LDAP_CA_CERT_DIR', None)
+
+# Include this setting if you want to validate the LDAP server certificates against your own CA.
+# Note that this is a NetBox-specific setting which sets:
+#     ldap.set_option(ldap.OPT_X_TLS_CACERTFILE, LDAP_CA_CERT_FILE)
+LDAP_CA_CERT_FILE = environ.get('LDAP_CA_CERT_FILE', None)
+
 AUTH_LDAP_USER_SEARCH_BASEDN = environ.get('AUTH_LDAP_USER_SEARCH_BASEDN', '')
 AUTH_LDAP_USER_SEARCH_ATTR = environ.get('AUTH_LDAP_USER_SEARCH_ATTR', 'sAMAccountName')
+AUTH_LDAP_USER_SEARCH_FILTER: str = environ.get(
+    'AUTH_LDAP_USER_SEARCH_FILTER', f'({AUTH_LDAP_USER_SEARCH_ATTR}=%(user)s)'
+)
+
 AUTH_LDAP_USER_SEARCH = LDAPSearch(
-    AUTH_LDAP_USER_SEARCH_BASEDN,
-    ldap.SCOPE_SUBTREE,
-    "(" + AUTH_LDAP_USER_SEARCH_ATTR + "=%(user)s)"
+    AUTH_LDAP_USER_SEARCH_BASEDN, ldap.SCOPE_SUBTREE, AUTH_LDAP_USER_SEARCH_FILTER
 )
 
 # This search ought to return all groups to which the user belongs. django_auth_ldap uses this to determine group
 # heirarchy.
+
 AUTH_LDAP_GROUP_SEARCH_BASEDN = environ.get('AUTH_LDAP_GROUP_SEARCH_BASEDN', '')
 AUTH_LDAP_GROUP_SEARCH_CLASS = environ.get('AUTH_LDAP_GROUP_SEARCH_CLASS', 'group')
-AUTH_LDAP_GROUP_SEARCH = LDAPSearch(AUTH_LDAP_GROUP_SEARCH_BASEDN, ldap.SCOPE_SUBTREE,
-                                    "(objectClass=" + AUTH_LDAP_GROUP_SEARCH_CLASS + ")")
+
+AUTH_LDAP_GROUP_SEARCH_FILTER: str = environ.get(
+    'AUTH_LDAP_GROUP_SEARCH_FILTER', f'(objectclass={AUTH_LDAP_GROUP_SEARCH_CLASS})'
+)
+AUTH_LDAP_GROUP_SEARCH = LDAPSearch(
+    AUTH_LDAP_GROUP_SEARCH_BASEDN, ldap.SCOPE_SUBTREE, AUTH_LDAP_GROUP_SEARCH_FILTER
+)
 AUTH_LDAP_GROUP_TYPE = _import_group_type(environ.get('AUTH_LDAP_GROUP_TYPE', 'GroupOfNamesType'))
 
 # Define a group required to login.
@@ -88,3 +109,6 @@ AUTH_LDAP_USER_ATTR_MAP = {
     "last_name": environ.get('AUTH_LDAP_ATTR_LASTNAME', 'sn'),
     "email": environ.get('AUTH_LDAP_ATTR_MAIL', 'mail')
 }
+
+# Update user object with the latest values from the LDAP directory every time the user logs in.
+AUTH_LDAP_ALWAYS_UPDATE_USER = environ.get('AUTH_LDAP_ALWAYS_UPDATE_USER', 'True').lower() == 'true'

docker-compose.override.yml.example

@@ -1,5 +1,22 @@
-version: '3.4'
 services:
   netbox:
     ports:
-      - 8000:8080
+      - "8000:8080"
+    # If you want the Nginx unit status page visible from the
+    # outside of the container add the following port mapping:
+    # - "8001:8081"
+    # healthcheck:
+      # Time for which the health check can fail after the container is started.
+      # This depends mostly on the performance of your database. On the first start,
+      # when all tables need to be created the start_period should be higher than on
+      # subsequent starts. For the first start after major version upgrades of NetBox
+      # the start_period might also need to be set higher.
+      # Default value in our docker-compose.yml is 60s
+      # start_period: 90s
+    # environment:
+      # SKIP_SUPERUSER: "false"
+      # SUPERUSER_API_TOKEN: ""
+      # SUPERUSER_EMAIL: ""
+      # SUPERUSER_NAME: ""
+      # SUPERUSER_PASSWORD: ""
+

docker-compose.test.override.yml

@@ -0,0 +1,5 @@
+services:
+  netbox:
+    ports:
+      - "127.0.0.1:8000:8080"
+

docker-compose.test.yml

@@ -1,39 +1,61 @@
-version: '3.4'
 services:
-  netbox:
-    image: ${IMAGE-netboxcommunity/netbox:latest}
+  netbox: &netbox
+    image: ${IMAGE-docker.io/netboxcommunity/netbox:latest}
     depends_on:
-    - postgres
-    - redis
-    - redis-cache
-    env_file: env/netbox.env
-    environment:
-      SKIP_STARTUP_SCRIPTS: ${SKIP_STARTUP_SCRIPTS-false}
-    user: 'unit:root'
-    volumes:
-    - ./startup_scripts:/opt/netbox/startup_scripts:z,ro
-    - ./${INITIALIZERS_DIR-initializers}:/opt/netbox/initializers:z,ro
-    - ./configuration:/etc/netbox/config:z,ro
-    - ./reports:/etc/netbox/reports:z,ro
-    - ./scripts:/etc/netbox/scripts:z,ro
-    - netbox-media-files:/opt/netbox/netbox/media:z
       postgres:
-    image: postgres:14-alpine
-    env_file: env/postgres.env
+        condition: service_healthy
       redis:
-    image: redis:7-alpine
-    command:
-    - sh
-    - -c # this is to evaluate the $REDIS_PASSWORD from the env
-    - redis-server --appendonly yes --requirepass $$REDIS_PASSWORD ## $$ because of docker-compose
-    env_file: env/redis.env
+        condition: service_healthy
       redis-cache:
-    image: redis:7-alpine
+        condition: service_healthy
+    env_file: env/netbox.env
+    user: "unit:root"
+    volumes:
+      - ./test-configuration/test_config.py:/etc/netbox/config/test_config.py:z,ro
+    healthcheck:
+      test: curl -f http://localhost:8080/login/ || exit 1
+      start_period: ${NETBOX_START_PERIOD-120s}
+      timeout: 3s
+      interval: 15s
+  netbox-worker:
+    <<: *netbox
+    command:
+      - /opt/netbox/venv/bin/python
+      - /opt/netbox/netbox/manage.py
+      - rqworker
+    healthcheck:
+      test: ps -aux | grep -v grep | grep -q rqworker || exit 1
+      start_period: 40s
+      timeout: 3s
+      interval: 15s
+
+  postgres:
+    image: docker.io/postgres:17-alpine
+    env_file: env/postgres.env
+    healthcheck:
+      test: pg_isready -q -t 2 -d $$POSTGRES_DB -U $$POSTGRES_USER ## $$ because of docker-compose
+      start_period: 20s
+      interval: 1s
+      timeout: 5s
+      retries: 5
+
+  redis: &redis
+    image: docker.io/valkey/valkey:8.1-alpine
     command:
       - sh
       - -c # this is to evaluate the $REDIS_PASSWORD from the env
-    - redis-server --requirepass $$REDIS_PASSWORD ## $$ because of docker-compose
+      - valkey-server --save "" --appendonly no --requirepass $$REDIS_PASSWORD ## $$ because of docker-compose
+    env_file: env/redis.env
+    healthcheck:
+      test: '[ $$(valkey-cli --pass "$${REDIS_PASSWORD}" ping) = ''PONG'' ]'
+      start_period: 5s
+      timeout: 3s
+      interval: 1s
+      retries: 5
+  redis-cache:
+    <<: *redis
     env_file: env/redis-cache.env
+
 volumes:
   netbox-media-files:
     driver: local

docker-compose.yml

@@ -1,67 +1,87 @@
-version: '3.4'
 services:
   netbox: &netbox
-    image: netboxcommunity/netbox:${VERSION-v3.2-2.0.0}
+    image: docker.io/netboxcommunity/netbox:${VERSION-v4.4-3.4.1}
     depends_on:
       - postgres
       - redis
       - redis-cache
-    - netbox-worker
     env_file: env/netbox.env
-    user: 'unit:root'
+    user: "unit:root"
+    healthcheck:
+      test: curl -f http://localhost:8080/login/ || exit 1
+      start_period: 90s
+      timeout: 3s
+      interval: 15s
     volumes:
-    - ./startup_scripts:/opt/netbox/startup_scripts:z,ro
-    - ./initializers:/opt/netbox/initializers:z,ro
       - ./configuration:/etc/netbox/config:z,ro
-    - ./reports:/etc/netbox/reports:z,ro
-    - ./scripts:/etc/netbox/scripts:z,ro
-    - netbox-media-files:/opt/netbox/netbox/media:z
+      - netbox-media-files:/opt/netbox/netbox/media:rw
+      - netbox-reports-files:/opt/netbox/netbox/reports:rw
+      - netbox-scripts-files:/opt/netbox/netbox/scripts:rw
   netbox-worker:
     <<: *netbox
     depends_on:
-    - redis
-    - postgres
+      netbox:
+        condition: service_healthy
     command:
       - /opt/netbox/venv/bin/python
       - /opt/netbox/netbox/manage.py
       - rqworker
-  netbox-housekeeping:
-    <<: *netbox
-    depends_on:
-    - redis
-    - postgres
-    command:
-    - /opt/netbox/housekeeping.sh
+    healthcheck:
+      test: ps -aux | grep -v grep | grep -q rqworker || exit 1
+      start_period: 20s
+      timeout: 3s
+      interval: 15s
 
   # postgres
   postgres:
-    image: postgres:14-alpine
+    image: docker.io/postgres:17-alpine
+    healthcheck:
+      test: pg_isready -q -t 2 -d $$POSTGRES_DB -U $$POSTGRES_USER
+      start_period: 20s
+      timeout: 30s
+      interval: 10s
+      retries: 5
     env_file: env/postgres.env
     volumes:
       - netbox-postgres-data:/var/lib/postgresql/data
 
   # redis
   redis:
-    image: redis:7-alpine
+    image: docker.io/valkey/valkey:8.1-alpine
     command:
       - sh
       - -c # this is to evaluate the $REDIS_PASSWORD from the env
-    - redis-server --appendonly yes --requirepass $$REDIS_PASSWORD ## $$ because of docker-compose
+      - valkey-server --appendonly yes --requirepass $$REDIS_PASSWORD ## $$ because of docker-compose
+    healthcheck: &redis-healthcheck
+      test: '[ $$(valkey-cli --pass "$${REDIS_PASSWORD}" ping) = ''PONG'' ]'
+      start_period: 5s
+      timeout: 3s
+      interval: 1s
+      retries: 5
     env_file: env/redis.env
     volumes:
       - netbox-redis-data:/data
   redis-cache:
-    image: redis:7-alpine
+    image: docker.io/valkey/valkey:8.1-alpine
     command:
       - sh
       - -c # this is to evaluate the $REDIS_PASSWORD from the env
-    - redis-server --requirepass $$REDIS_PASSWORD ## $$ because of docker-compose
+      - valkey-server --requirepass $$REDIS_PASSWORD ## $$ because of docker-compose
+    healthcheck: *redis-healthcheck
     env_file: env/redis-cache.env
+    volumes:
+      - netbox-redis-cache-data:/data
 
 volumes:
   netbox-media-files:
     driver: local
   netbox-postgres-data:
     driver: local
+  netbox-redis-cache-data:
+    driver: local
   netbox-redis-data:
     driver: local
+  netbox-reports-files:
+    driver: local
+  netbox-scripts-files:
+    driver: local

docker/docker-entrypoint.sh

@@ -46,6 +46,8 @@ if ! ./manage.py migrate --check >/dev/null 2>&1; then
   ./manage.py remove_stale_contenttypes --no-input
   echo "⚙️ Removing expired user sessions"
   ./manage.py clearsessions
+  echo "⚙️ Building search index (lazy)"
+  ./manage.py reindex --lazy
 fi
 
 # Create Superuser if required
@@ -70,22 +72,24 @@ else
   fi
 
   ./manage.py shell --interface python <<END
-from django.contrib.auth.models import User
-from users.models import Token
+from users.models import Token, User
 if not User.objects.filter(username='${SUPERUSER_NAME}'):
-    u=User.objects.create_superuser('${SUPERUSER_NAME}', '${SUPERUSER_EMAIL}', '${SUPERUSER_PASSWORD}')
+    u = User.objects.create_superuser('${SUPERUSER_NAME}', '${SUPERUSER_EMAIL}', '${SUPERUSER_PASSWORD}')
     Token.objects.create(user=u, key='${SUPERUSER_API_TOKEN}')
 END
 
   echo "💡 Superuser Username: ${SUPERUSER_NAME}, E-Mail: ${SUPERUSER_EMAIL}"
 fi
 
-# Run the startup scripts (and initializers)
-if [ "$SKIP_STARTUP_SCRIPTS" == "true" ]; then
-  echo "↩️ Skipping startup scripts"
-else
-  echo "import runpy; runpy.run_path('../startup_scripts')" | ./manage.py shell --interface python
-fi
+./manage.py shell --interface python <<END
+from users.models import Token
+try:
+    old_default_token = Token.objects.get(key="0123456789abcdef0123456789abcdef01234567")
+    if old_default_token:
+        print("⚠️ Warning: You have the old default admin API token in your database. This token is widely known; please remove it. Log in as your superuser and check API Tokens in your user menu.")
+except Token.DoesNotExist:
+    pass
+END
 
 echo "✅ Initialisation is done."
 

docker/housekeeping.sh

@@ -1,8 +0,0 @@
-#!/bin/bash
-SECONDS=${HOUSEKEEPING_INTERVAL:=86400}
-echo "Interval set to ${SECONDS} seconds"
-while true; do
-  date
-  /opt/netbox/venv/bin/python /opt/netbox/netbox/manage.py housekeeping
-  sleep "${SECONDS}s"
-done

docker/launch-netbox.sh

@@ -1,6 +1,7 @@
 #!/bin/bash
 
 UNIT_CONFIG="${UNIT_CONFIG-/etc/unit/nginx-unit.json}"
+# Also used in "nginx-unit.json"
 UNIT_SOCKET="/opt/unit/unit.sock"
 
 load_configuration() {
@@ -35,7 +36,7 @@ load_configuration() {
       http://localhost/config
   )
   if [ "$RESP_CODE" != "200" ]; then
-    echo "⚠️ Could no load Unit configuration"
+    echo "⚠️ Could not load Unit configuration"
     kill "$(cat /opt/unit/unit.pid)"
     return 1
   fi
@@ -50,7 +51,7 @@ exec unitd \
   --control unix:$UNIT_SOCKET \
   --pid /opt/unit/unit.pid \
   --log /dev/stdout \
-  --state /opt/unit/state/ \
-  --tmp /opt/unit/tmp/ \
+  --statedir /opt/unit/state/ \
+  --tmpdir /opt/unit/tmp/ \
   --user unit \
   --group root

docker/nginx-unit.json

@@ -1,11 +1,40 @@
 {
   "listeners": {
-    "*:8080": {
-      "pass": "routes"
+    "0.0.0.0:8080": {
+      "pass": "routes/main",
+      "forwarded": {
+        "client_ip": "X-Forwarded-For",
+        "protocol": "X-Forwarded-Proto",
+        "source": ["10.0.0.0/8", "172.16.0.0/12", "192.168.0.0/16"]
       }
     },
-
-  "routes": [
+    "0.0.0.0:8081": {
+      "pass": "routes/status",
+      "forwarded": {
+        "client_ip": "X-Forwarded-For",
+        "protocol": "X-Forwarded-Proto",
+        "source": ["10.0.0.0/8", "172.16.0.0/12", "192.168.0.0/16"]
+      }
+    },
+    "[::]:8080": {
+      "pass": "routes/main",
+      "forwarded": {
+        "client_ip": "X-Forwarded-For",
+        "protocol": "X-Forwarded-Proto",
+        "source": ["fc00::/7", "fe80::/10"]
+      }
+    },
+    "[::]:8081": {
+      "pass": "routes/status",
+      "forwarded": {
+        "client_ip": "X-Forwarded-For",
+        "protocol": "X-Forwarded-Proto",
+        "source": ["fc00::/7", "fe80::/10"]
+      }
+    }
+  },
+  "routes": {
+    "main": [
       {
         "match": {
           "uri": "/static/*"
@@ -14,14 +43,23 @@
           "share": "/opt/netbox/netbox${uri}"
         }
       },
-
       {
         "action": {
           "pass": "applications/netbox"
         }
       }
     ],
-
+    "status": [
+      {
+        "match": {
+          "uri": "/status/*"
+        },
+        "action": {
+          "proxy": "http://unix:/opt/unit/unit.sock"
+        }
+      }
+    ]
+  },
   "applications": {
     "netbox": {
       "type": "python 3",
@@ -35,6 +73,10 @@
       }
     }
   },
-
-  "access_log": "/dev/stdout"
+  "access_log": "/dev/stdout",
+  "settings": {
+    "http": {
+      "max_body_size": 104857600
+    }
+  }
 }

docker/unit.list

@@ -0,0 +1 @@
+deb [signed-by=/usr/share/keyrings/nginx-keyring.gpg] http://packages.nginx.org/unit/ubuntu/ noble unit

env/netbox.env

@@ -1,3 +1,4 @@
+API_TOKEN_PEPPER_1=Qy+F=OTeGskWQ(wTMgjc+NPPlz6YwFXY=KHIIg=wpYXT&e(6u8
 CORS_ORIGIN_ALLOW_ALL=True
 DB_HOST=postgres
 DB_NAME=netbox
@@ -15,13 +16,8 @@ EMAIL_USERNAME=netbox
 EMAIL_USE_SSL=false
 EMAIL_USE_TLS=false
 GRAPHQL_ENABLED=true
-HOUSEKEEPING_INTERVAL=86400
-MAX_PAGE_SIZE=1000
 MEDIA_ROOT=/opt/netbox/netbox/media
 METRICS_ENABLED=false
-NAPALM_PASSWORD=
-NAPALM_TIMEOUT=10
-NAPALM_USERNAME=
 REDIS_CACHE_DATABASE=1
 REDIS_CACHE_HOST=redis-cache
 REDIS_CACHE_INSECURE_SKIP_TLS_VERIFY=false
@@ -33,11 +29,6 @@ REDIS_INSECURE_SKIP_TLS_VERIFY=false
 REDIS_PASSWORD=H733Kdjndks81
 REDIS_SSL=false
 RELEASE_CHECK_URL=https://api.github.com/repos/netbox-community/netbox/releases
-SECRET_KEY=r8OwDznj!!dci#P9ghmRfdu1Ysxm0AiPeDCQhKE+N_rClfWNj
-SKIP_STARTUP_SCRIPTS=false
-SKIP_SUPERUSER=false
-SUPERUSER_API_TOKEN=0123456789abcdef0123456789abcdef01234567
-SUPERUSER_EMAIL=admin@example.com
-SUPERUSER_NAME=admin
-SUPERUSER_PASSWORD=admin
+SECRET_KEY='r(m)9nLGnz$(_q3N4z1k(EFsMCjjjzx08x9VhNVcfd%6RF#r!6DE@+V5Zk2X'
+SKIP_SUPERUSER=true
 WEBHOOKS_ENABLED=true

initializers/aggregates.yml

@@ -1,7 +0,0 @@
-# - prefix: 10.0.0.0/16
-#   rir: RFC1918
-#   tenant: tenant1
-# - prefix: fd00:ccdd::/32
-#   rir: RFC4193 ULA
-# - prefix: 2001:db8::/32
-#   rir: RFC3849

initializers/asns.yml

@@ -1,7 +0,0 @@
-# - asn: 1
-#   rir: RFC1918
-#   tenant: tenant1
-# - asn: 2
-#   rir: RFC4193 ULA
-# - asn: 3
-#   rir: RFC3849

initializers/cables.yml

@@ -1,71 +0,0 @@
-# # Required parameters for termination X ('a' or 'b'):
-# #
-# # ```
-# #   termination_x_name -> name of interface
-# #   termination_x_device -> name of the device interface belongs to
-# #   termination_x_class -> required if different than 'Interface' which is the default
-# # ```
-# #
-# # Supported termination classes: Interface, ConsolePort, ConsoleServerPort, FrontPort, RearPort, PowerPort, PowerOutlet
-# #
-# #
-# # If a termination is a circuit then the required parameter is termination_x_circuit.
-# # Required parameters for a circuit termination:
-# #
-# # ```
-# # termination_x_circuit:
-# #   term_side -> termination side of a circuit. Must be A or B
-# #   cid -> circuit ID value
-# #   site OR provider_network -> name of Site or ProviderNetwork respectively. If both provided, Site takes precedence
-# # ```
-# #
-# # If a termination is a power feed then the required parameter is termination_x_feed.
-# #
-# # ```
-# #   termination_x_feed:
-# #     name -> name of the PowerFeed object
-# #     power_panel:
-# #       name -> name of the PowerPanel the PowerFeed is attached to
-# #       site -> name of the Site in which the PowerPanel is present
-# # ```
-# #
-# # Any other Cable parameters supported by Netbox are supported as the top level keys, e.g. 'type', 'status', etc.
-# #
-# # - termination_a_name: console
-# #   termination_a_device: spine
-# #   termination_a_class: ConsolePort
-# #   termination_b_name: tty9
-# #   termination_b_device: console-server
-# #   termination_b_class: ConsoleServerPort
-# #   type: cat6
-# #
-# - termination_a_name: to-server02
-#   termination_a_device: server01
-#   termination_b_name: to-server01
-#   termination_b_device: server02
-#   status: planned
-#   type: mmf
-
-# - termination_a_name: eth0
-#   termination_a_device: server02
-#   termination_b_circuit:
-#     term_side: A
-#     cid: Circuit_ID-1
-#     site: AMS 1
-#   type: cat6
-
-# - termination_a_name: psu0
-#   termination_a_device: server04
-#   termination_a_class: PowerPort
-#   termination_b_feed:
-#     name: power feed 1
-#     power_panel:
-#       name: power panel AMS 1
-#       site: AMS 1
-
-# - termination_a_name: outlet1
-#   termination_a_device: server04
-#   termination_a_class: PowerOutlet
-#   termination_b_name: psu1
-#   termination_b_device: server04
-#   termination_b_class: PowerPort

initializers/circuit_types.yml

@@ -1,6 +0,0 @@
-# - name: VPLS
-#   slug: vpls
-# - name: MPLS
-#   slug: mpls
-# - name: Internet
-#   slug: internet

initializers/circuits.yml

@@ -1,7 +0,0 @@
-# - cid: Circuit_ID-1
-#   provider: Provider1
-#   type: Internet
-#   tenant: tenant1
-# - cid: Circuit_ID-2
-#   provider: Provider2
-#   type: MPLS

initializers/cluster_groups.yml

@@ -1,4 +0,0 @@
-# - name: Group 1
-#   slug: group-1
-# - name: Group 2
-#   slug: group-2

initializers/cluster_types.yml

@@ -1,2 +0,0 @@
-# - name: Hyper-V
-#   slug: hyper-v

initializers/clusters.yml

@@ -1,7 +0,0 @@
-# - name: cluster1
-#   type: Hyper-V
-#   group: Group 1
-#   tenant: tenant1
-# - name: cluster2
-#   type: Hyper-V
-#   site: SING 1

initializers/contact_groups.yml

@@ -1,7 +0,0 @@
-# - name: Network-Team
-#   slug: network-team
-#   description: This is a new contact group for the Network-Team
-# - name: New Contact Group
-#   slug: new-contact-group
-#   description: This is a new contact group sub under of Network-Team
-#   parent: Network-Team

initializers/contact_roles.yml

@@ -1,3 +0,0 @@
-# - name: New Contact Role
-#   slug: new-contact-role
-#   description: This is a new contact role description

initializers/contacts.yml

@@ -1,20 +0,0 @@
-# - name: Lee Widget
-#   title: CEO of Widget Corp
-#   phone: 221-555-1212
-#   email: widgetCEO@widgetcorp.com
-#   address: 1200 Nowhere Blvd, Scranton NJ, 555111
-#   comments: This is a very important contact
-# - name: Ali Gator
-#   group: Network-Team
-#   title: Consultant for Widget Corp
-#   phone: 221-555-1213
-#   email: Consultant@widgetcorp.com
-#   address: 1200 Nowhere Blvd, Scranton NJ, 555111
-#   comments: This is a very important contact
-# - name: Karlchen Maier
-#   group: New Contact Group
-#   title: COO of Widget Corp
-#   phone: 221-555-1214
-#   email: Karlchen@widgetcorp.com
-#   address: 1200 Nowhere Blvd, Scranton NJ, 555111
-#   comments: This is a very important contact

initializers/custom_fields.yml

@@ -1,93 +0,0 @@
-## Possible Choices:
-##   type:
-##   - text
-##   - integer
-##   - boolean
-##   - date
-##   - url
-##   - select
-##   filter_logic:
-##   - disabled
-##   - loose
-##   - exact
-##
-## Examples:
-
-# text_field:
-#   type: text
-#   label: Custom Text
-#   description: Enter text in a text field.
-#   required: false
-#   weight: 0
-#   on_objects:
-#   - dcim.models.Device
-#   - dcim.models.Rack
-#   - dcim.models.Site
-#   - dcim.models.DeviceType
-#   - ipam.models.IPAddress
-#   - ipam.models.Prefix
-#   - tenancy.models.Tenant
-#   - virtualization.models.VirtualMachine
-# integer_field:
-#   type: integer
-#   label: Custom Number
-#   description: Enter numbers into an integer field.
-#   required: true
-#   filter_logic: loose
-#   weight: 10
-#   on_objects:
-#   - tenancy.models.Tenant
-# select_field:
-#   type: select
-#   label: Choose between items
-#   required: false
-#   filter_logic: exact
-#   weight: 30
-#   default: First Item
-#   on_objects:
-#   - dcim.models.Device
-#   choices:
-#   - First Item
-#   - Second Item
-#   - Third Item
-#   - Fifth Item
-#   - Fourth Item
-# select_field_legacy_format:
-#   type: select
-#   label: Choose between items
-#   required: false
-#   filter_logic: loose
-#   weight: 30
-#   on_objects:
-#   - dcim.models.Device
-#   choices:
-#   - value: A # this is the deprecated format.
-#   - value: B # we only use it for the tests.
-#   - value: C # please see above for the new format.
-#   - value: "D like deprecated"
-#     weight: 999
-#   - value: E
-# boolean_field:
-#   type: boolean
-#   label: Yes Or No?
-#   required: true
-#   filter_logic: loose
-#   default: "false" # important: put "false" in quotes!
-#   weight: 90
-#   on_objects:
-#   - dcim.models.Device
-# url_field:
-#   type: url
-#   label: Hyperlink
-#   description: Link to something nice.
-#   required: true
-#   filter_logic: disabled
-#   on_objects:
-#   - tenancy.models.Tenant
-# date_field:
-#   type: date
-#   label: Important Date
-#   required: false
-#   filter_logic: disabled
-#   on_objects:
-#   - dcim.models.Device

initializers/custom_links.yml

@@ -1,21 +0,0 @@
-## Possible Choices:
-##   new_window:
-##   - True
-##   - False
-##   content_type:
-##   - device
-##   - site
-##   - any-other-content-type
-##
-## Examples:
-
-# - name: link_to_repo
-#   link_text: 'Link to Netbox Docker'
-#   link_url: 'https://github.com/netbox-community/netbox-docker'
-#   new_window: False
-#   content_type: device
-# - name: link_to_localhost
-#   link_text: 'Link to localhost'
-#   link_url: 'http://localhost'
-#   new_window: True
-#   content_type: device

initializers/dcim_interfaces.yml

@@ -1,35 +0,0 @@
-## Possible Choices:
-##   type:
-##   - virtual
-##   - lag
-##   - 1000base-t
-##   - ... and many more. See for yourself:
-##     https://github.com/netbox-community/netbox/blob/295d4f0394b431351c0cb2c3ecc791df68c6c2fb/netbox/dcim/choices.py#L510
-##
-## Examples:
-
-# - device: server01
-#   name: ath0
-#   type: 1000base-t
-#   lag: ae0
-#   bridge: br0
-# - device: server01
-#   name: ath1
-#   type: 1000base-t
-#   parent: ath0
-# - device: server01
-#   enabled: true
-#   type: 1000base-x-sfp
-#   name: to-server02
-# - device: server02
-#   enabled: true
-#   type: 1000base-x-sfp
-#   name: to-server01
-# - device: server02
-#   enabled: true
-#   type: 1000base-t
-#   name: eth0
-# - device: server02
-#   enabled: true
-#   type: virtual
-#   name: loopback

initializers/device_roles.yml

@@ -1,15 +0,0 @@
-# - name: switch
-#   slug: switch
-#   color: Grey
-# - name: router
-#   slug: router
-#   color: Cyan
-# - name: load-balancer
-#   slug: load-balancer
-#   color: Red
-# - name: server
-#   slug: server
-#   color: Blue
-# - name: patchpanel
-#   slug: patchpanel
-#   color: Black

initializers/device_types.yml

@@ -1,57 +0,0 @@
-# - model: Model 1
-#   manufacturer: Manufacturer 1
-#   slug: model-1
-#   u_height: 2
-#   custom_field_data:
-#     text_field: Description
-# - model: Model 2
-#   manufacturer: Manufacturer 1
-#   slug: model-2
-#   custom_field_data:
-#     text_field: Description
-# - model: Model 3
-#   manufacturer: Manufacturer 1
-#   slug: model-3
-#   is_full_depth: false
-#   u_height: 0
-#   custom_field_data:
-#     text_field: Description
-# - model: Other
-#   manufacturer: No Name
-#   slug: other
-#   custom_field_data:
-#     text_field: Description
-#   interfaces:
-#     - name: eth0
-#       type: 1000base-t
-#       mgmt_only: True
-#     - name: eth1
-#       type: 1000base-t
-#   console_server_ports:
-#     - name_template: ttyS[1-48]
-#       type: rj-45
-#   power_ports:
-#     - name_template: psu[0,1]
-#       type: iec-60320-c14
-#       maximum_draw: 35
-#       allocated_draw: 35
-#   front_ports:
-#     - name_template: front[1,2]
-#       type: 8p8c
-#       rear_port_template: rear[0,1]
-#       rear_port_position_template: "[1,2]"
-#   rear_ports:
-#     - name_template: rear[0,1]
-#       type: 8p8c
-#       positions_template: "[3,2]"
-#   device_bays:
-#     - name: bay0 # both non-template and template field specified; non-template field takes precedence
-#       name_template: bay[0-9]
-#       label: test0
-#       label_template: test[0-5,9,6-8]
-#       description: Test description
-#   power_outlets:
-#     - name_template: outlet[0,1]
-#       type: iec-60320-c5
-#       power_port: psu0
-#       feed_leg: B

initializers/devices.yml

@@ -1,53 +0,0 @@
-## Possible Choices:
-##   face:
-##   - front
-##   - rear
-##   status:
-##   - offline
-##   - active
-##   - planned
-##   - staged
-##   - failed
-##   - inventory
-##   - decommissioning
-##
-## Examples:
-
-# - name: server01
-#   device_role: server
-#   device_type: Other
-#   site: AMS 1
-#   rack: rack-01
-#   face: front
-#   position: 1
-#   custom_field_data:
-#     text_field: Description
-# - name: server02
-#   device_role: server
-#   device_type: Other
-#   site: AMS 2
-#   rack: rack-02
-#   face: front
-#   position: 2
-#   primary_ip4: 10.1.1.2/24
-#   primary_ip6: 2001:db8:a000:1::2/64
-#   custom_field_data:
-#     text_field: Description
-# - name: server03
-#   device_role: server
-#   device_type: Other
-#   site: SING 1
-#   rack: rack-03
-#   face: front
-#   position: 3
-#   custom_field_data:
-#     text_field: Description
-# - name: server04
-#   device_role: server
-#   device_type: Other
-#   site: SING 1
-#   location: cage 101
-#   face: front
-#   position: 3
-#   custom_field_data:
-#     text_field: Description

initializers/groups.yml

@@ -1,9 +0,0 @@
-# applications:
-#   users:
-#     - technical_user
-# readers:
-#   users:
-#     - reader
-# writers:
-#   users:
-#     - writer

initializers/ip_addresses.yml

@@ -1,44 +0,0 @@
-## Possible Choices:
-##   status:
-##   - active
-##   - reserved
-##   - deprecated
-##   - dhcp
-##   role:
-##   - loopback
-##   - secondary
-##   - anycast
-##   - vip
-##   - vrrp
-##   - hsrp
-##   - glbp
-##   - carp
-##
-## Examples:
-
-# - address: 10.1.1.1/24
-#   device: server01
-#   interface: to-server02
-#   status: active
-#   vrf: vrf1
-# - address: 2001:db8:a000:1::1/64
-#   device: server01
-#   interface: to-server02
-#   status: active
-#   vrf: vrf1
-# - address: 10.1.1.2/24
-#   device: server02
-#   interface: to-server01
-#   status: active
-# - address: 2001:db8:a000:1::2/64
-#   device: server02
-#   interface: to-server01
-#   status: active
-# - address: 10.1.1.10/24
-#   description: reserved IP
-#   status: reserved
-#   tenant: tenant1
-# - address: 2001:db8:a000:1::10/64
-#   description: reserved IP
-#   status: reserved
-#   tenant: tenant1

initializers/locations.yml

@@ -1,3 +0,0 @@
-# - name: cage 101
-#   slug: cage-101
-#   site: SING 1

initializers/manufacturers.yml

@@ -1,6 +0,0 @@
-# - name: Manufacturer 1
-#   slug: manufacturer-1
-# - name: Manufacturer 2
-#   slug: manufacturer-2
-# - name: No Name
-#   slug: no-name

initializers/object_permissions.yml

@@ -1,48 +0,0 @@
-# all.ro:
-#   actions:
-#     - view
-#   description: 'Read Only for All Objects'
-#   enabled: true
-#   groups:
-#     - applications
-#     - readers
-#   object_types: all
-#   users:
-#     - jdoe
-# all.rw:
-#   actions:
-#     - add
-#     - change
-#     - delete
-#     - view
-#   description: 'Read/Write for All Objects'
-#   enabled: true
-#   groups:
-#     - writers
-#   object_types: all
-# network_team.rw:
-#   actions:
-#     - add
-#     - change
-#     - delete
-#     - view
-#   description: "Network Team Permissions"
-#   enabled: true
-#   object_types:
-#     circuits:
-#       - circuit
-#       - circuittermination
-#       - circuittype
-#       - provider
-#     dcim: all
-#     ipam:
-#       - aggregate
-#       - ipaddress
-#       - prefix
-#       - rir
-#       - role
-#       - routetarget
-#       - service
-#       - vlan
-#       - vlangroup
-#       - vrf

initializers/platforms.yml

@@ -1,15 +0,0 @@
-# - name: Platform 1
-#   slug: platform-1
-#   manufacturer: Manufacturer 1
-#   napalm_driver: driver1
-#   napalm_args: "{'arg1': 'value1', 'arg2': 'value2'}"
-# - name: Platform 2
-#   slug: platform-2
-#   manufacturer: Manufacturer 2
-#   napalm_driver: driver2
-#   napalm_args: "{'arg1': 'value1', 'arg2': 'value2'}"
-# - name: Platform 3
-#   slug: platform-3
-#   manufacturer: No Name
-#   napalm_driver: driver3
-#   napalm_args: "{'arg1': 'value1', 'arg2': 'value2'}"

initializers/power_feeds.yml

@@ -1,14 +0,0 @@
-# - name: power feed 1
-#   power_panel: power panel AMS 1
-#   voltage: 208
-#   amperage: 50
-#   max_utilization: 80
-#   phase: Single phase
-#   rack: rack-01
-# - name: power feed 2
-#   power_panel: power panel SING 1
-#   voltage: 208
-#   amperage: 50
-#   max_utilization: 80
-#   phase: Three-phase
-#   rack: rack-03

initializers/power_panels.yml

@@ -1,5 +0,0 @@
-# - name: power panel AMS 1
-#   site: AMS 1   
-# - name: power panel SING 1
-#   site: SING 1 
-#   location: cage 101

initializers/prefix_vlan_roles.yml

@@ -1,2 +0,0 @@
-# - name: Main Management
-#   slug: main-management

initializers/prefixes.yml

@@ -1,29 +0,0 @@
-## Possible Choices:
-##   status:
-##   - container
-##   - active
-##   - reserved
-##   - deprecated
-##
-## Examples:
-
-# - description: prefix1
-#   prefix: 10.1.1.0/24
-#   site: AMS 1
-#   status: active
-#   tenant: tenant1
-#   vlan: vlan1
-# - description: prefix2
-#   prefix: 10.1.2.0/24
-#   site: AMS 2
-#   status: active
-#   tenant: tenant2
-#   vlan: vlan2
-#   is_pool: true
-#   vrf: vrf2
-# - description: ipv6 prefix1
-#   prefix: 2001:db8:a000:1::/64
-#   site: AMS 2
-#   status: active
-#   tenant: tenant2
-#   vlan: vlan2

initializers/providers.yml

@@ -1,6 +0,0 @@
-# - name: Provider1
-#   slug: provider1
-#   asn: 121
-# - name: Provider2
-#   slug: provider2
-#   asn: 122

initializers/rack_roles.yml

@@ -1,12 +0,0 @@
-# - name: Role 1
-#   slug: role-1
-#   color: Pink
-# - name: Role 2
-#   slug: role-2
-#   color: Cyan
-# - name: Role 3
-#   slug: role-3
-#   color: Grey
-# - name: Role 4
-#   slug: role-4
-#   color: Teal

initializers/racks.yml

@@ -1,41 +0,0 @@
-## Possible Choices:
-##   width:
-##   - 19
-##   - 23
-##   types:
-##   - 2-post-frame
-##   - 4-post-frame
-##   - 4-post-cabinet
-##   - wall-frame
-##   - wall-cabinet
-##   outer_unit:
-##   - mm
-##   - in
-##
-## Examples:
-
-# - site: AMS 1
-#   name: rack-01
-#   role: Role 1
-#   type: 4-post-cabinet
-#   width: 19
-#   u_height: 47
-#   custom_field_data:
-#     text_field: Description
-# - site: AMS 2
-#   name: rack-02
-#   role: Role 2
-#   type: 4-post-cabinet
-#   width: 19
-#   u_height: 47
-#   custom_field_data:
-#     text_field: Description
-# - site: SING 1
-#   name: rack-03
-#   location: cage 101
-#   role: Role 3
-#   type: 4-post-cabinet
-#   width: 19
-#   u_height: 47
-#   custom_field_data:
-#     text_field: Description

initializers/regions.yml

@@ -1,10 +0,0 @@
-# - name: Singapore
-#   slug: singapore
-# - name: Amsterdam
-#   slug: amsterdam
-# - name: Downtown
-#   slug: downtown
-#   parent: Amsterdam
-# - name: Suburbs
-#   slug: suburbs
-#   parent: Amsterdam

initializers/rirs.yml

@@ -1,9 +0,0 @@
-# - is_private: true
-#   name: RFC1918
-#   slug: rfc1918
-# - is_private: true
-#   name: RFC4193 ULA
-#   slug: rfc4193-ula
-# - is_private: true
-#   name: RFC3849
-#   slug: rfc3849

initializers/route_targets.yml

@@ -1,3 +0,0 @@
-# - name: 65000:1001
-#   tenant: tenant1
-# - name: 65000:1002

initializers/services.yml

@@ -1,15 +0,0 @@
-# - name: DNS
-#   protocol: TCP
-#   ports:
-#     - 53
-#   virtual_machine: virtual machine 1
-# - name: DNS
-#   protocol: UDP
-#   ports:
-#     - 53
-#   virtual_machine: virtual machine 1
-# - name: MISC
-#   protocol: UDP
-#   ports: 
-#     - 4000
-#   device: server01

initializers/sites.yml

@@ -1,30 +0,0 @@
-# - name: AMS 1
-#   slug: ams1
-#   region: Downtown
-#   status: active
-#   facility: Amsterdam 1
-#   custom_field_data:
-#     text_field: Description for AMS1
-# - name: AMS 2
-#   slug: ams2
-#   region: Downtown
-#   status: active
-#   facility: Amsterdam 2
-#   custom_field_data:
-#     text_field: Description for AMS2
-# - name: AMS 3
-#   slug: ams3
-#   region: Suburbs
-#   status: active
-#   facility: Amsterdam 3
-#   tenant: tenant1
-#   custom_field_data:
-#     text_field: Description for AMS3
-# - name: SING 1
-#   slug: sing1
-#   region: Singapore
-#   status: active
-#   facility: Singapore 1
-#   tenant: tenant2
-#   custom_field_data:
-#     text_field: Description for SING1

initializers/tags.yml

@@ -1,12 +0,0 @@
-# - name: Tag 1
-#   slug: tag-1
-#   color: Pink
-# - name: Tag 2
-#   slug: tag-2
-#   color: Cyan
-# - name: Tag 3
-#   slug: tag-3
-#   color: Grey
-# - name: Tag 4
-#   slug: tag-4
-#   color: Teal

initializers/tenant_groups.yml

@@ -1,4 +0,0 @@
-# - name: Tenant Group 1
-#   slug: tenant-group-1
-# - name: Tenant Group 2
-#   slug: tenant-group-2

initializers/tenants.yml

@@ -1,5 +0,0 @@
-# - name: tenant1
-#   slug: tenant1
-# - name: tenant2
-#   slug: tenant2
-#   group: Tenant Group 2

initializers/users.yml

@@ -1,15 +0,0 @@
-# technical_user:
-#   api_token: 0123456789technicaluser789abcdef01234567 # must be looooong!
-# reader:
-#   password: reader
-# writer:
-#   password: writer
-#   api_token: "" # a token is generated automatically unless the value is explicity set to empty
-# jdoe:
-#   first_name: John
-#   last_name: Doe
-#   api_token: 0123456789jdoe789abcdef01234567jdoe
-#   is_active: True
-#   is_superuser: False
-#   is_staff: False
-#   email: john.doe@example.com

initializers/virtual_machines.yml

@@ -1,28 +0,0 @@
-## Possible Choices:
-##   status:
-##   - active
-##   - offline
-##   - staged
-##
-## Examples:
-
-# - cluster: cluster1
-#   comments: VM1
-#   disk: 200
-#   memory: 4096
-#   name: virtual machine 1
-#   platform: Platform 2
-#   status: active
-#   tenant: tenant1
-#   vcpus: 8
-# - cluster: cluster1
-#   comments: VM2
-#   disk: 100
-#   memory: 2048
-#   name: virtual machine 2
-#   platform: Platform 2
-#   primary_ip4: 10.1.1.10/24
-#   primary_ip6: 2001:db8:a000:1::10/64
-#   status: active
-#   tenant: tenant1
-#   vcpus: 8

initializers/virtualization_interfaces.yml

@@ -1,12 +0,0 @@
-# - description: Network Interface 1
-#   enabled: true
-#   mac_address: 00:77:77:77:77:77
-#   mtu: 1500
-#   name: Network Interface 1
-#   virtual_machine: virtual machine 1
-# - description: Network Interface 2
-#   enabled: true
-#   mac_address: 00:55:55:55:55:55
-#   mtu: 1500
-#   name: Network Interface 2
-#   virtual_machine: virtual machine 1

initializers/vlan_groups.yml

@@ -1,24 +0,0 @@
-# - name: VLAN group 1
-#   scope_type: dcim.region
-#   scope: Amsterdam
-#   slug: vlan-group-1
-# - name: VLAN group 2
-#   scope_type: dcim.site
-#   scope: AMS 1
-#   slug: vlan-group-2
-# - name: VLAN group 3
-#   scope_type: dcim.location
-#   scope: cage 101
-#   slug: vlan-group-3
-# - name: VLAN group 4
-#   scope_type: dcim.rack
-#   scope: rack-01
-#   slug: vlan-group-4
-# - name: VLAN group 5
-#   scope_type: virtualization.cluster
-#   scope: cluster1
-#   slug: vlan-group-5
-# - name: VLAN group 6
-#   scope_type: virtualization.clustergroup
-#   scope: Group 1
-#   slug: vlan-group-6

initializers/vlans.yml

@@ -1,19 +0,0 @@
-## Possible Choices:
-##   status:
-##   - active
-##   - reserved
-##   - deprecated
-##
-## Examples:
-
-# - name: vlan1
-#   site: AMS 1
-#   status: active
-#   vid: 5
-#   role: Main Management
-#   description: VLAN 5 for MGMT
-# - group: VLAN group 2
-#   name: vlan2
-#   site: AMS 1
-#   status: active
-#   vid: 1300

initializers/vrfs.yml

@@ -1,8 +0,0 @@
-# - enforce_unique: true
-#   name: vrf1
-#   tenant: tenant1
-#   description: main VRF
-# - enforce_unique: true
-#   name: vrf2
-#   rd: "6500:6500"
-#   tenant: tenant2

initializers/webhooks.yml

@@ -1,27 +0,0 @@
-## Possible Choices:
-##   object_types:
-##   - device
-##   - site
-##   - any-other-content-type
-##   types:
-##   - type_create
-##   - type_update
-##   - type_delete
-## Examples:
-
-# - name: device_creation
-#   payload_url: 'http://localhost:8080'
-#   object_types:
-#     - device
-#     - cable
-#   type_create: True
-# - name: device_update
-#   payload_url: 'http://localhost:8080'
-#   object_types:
-#     - device
-#   type_update: True
-# - name: device_delete
-#   payload_url: 'http://localhost:8080'
-#   object_types:
-#     - device
-#   type_delete: True

reports/devices.py.example

@@ -1,46 +0,0 @@
-from dcim.choices import DeviceStatusChoices
-from dcim.models import ConsolePort, Device, PowerPort
-from extras.reports import Report
-
-
-class DeviceConnectionsReport(Report):
-    description = "Validate the minimum physical connections for each device"
-
-    def test_console_connection(self):
-
-        # Check that every console port for every active device has a connection defined.
-        active = DeviceStatusChoices.STATUS_ACTIVE
-        for console_port in ConsolePort.objects.prefetch_related('device').filter(device__status=active):
-            if console_port.connected_endpoint is None:
-                self.log_failure(
-                    console_port.device,
-                    "No console connection defined for {}".format(console_port.name)
-                )
-            elif not console_port.connection_status:
-                self.log_warning(
-                    console_port.device,
-                    "Console connection for {} marked as planned".format(console_port.name)
-                )
-            else:
-                self.log_success(console_port.device)
-
-    def test_power_connections(self):
-
-        # Check that every active device has at least two connected power supplies.
-        for device in Device.objects.filter(status=DeviceStatusChoices.STATUS_ACTIVE):
-            connected_ports = 0
-            for power_port in PowerPort.objects.filter(device=device):
-                if power_port.connected_endpoint is not None:
-                    connected_ports += 1
-                    if not power_port.connection_status:
-                        self.log_warning(
-                            device,
-                            "Power connection for {} marked as planned".format(power_port.name)
-                        )
-            if connected_ports < 2:
-                self.log_failure(
-                    device,
-                    "{} connected power supplies found (2 needed)".format(connected_ports)
-                )
-            else:
-                self.log_success(device)

requirements-container.txt

@@ -1,5 +1,6 @@
-django-auth-ldap==4.1.0
-django-storages[azure,boto3,dropbox,google,libcloud,sftp]==1.12.3
-napalm==4.0.0
-psycopg2==2.9.3
-ruamel.yaml==0.17.21
+django-auth-ldap==5.2.0
+dulwich==0.24.8
+python3-saml==1.16.0
+--no-binary lxml
+--no-binary xmlsec
+sentry-sdk[django]==2.43.0

startup_scripts/000_users.py

@@ -1,25 +0,0 @@
-import sys
-
-from django.contrib.auth.models import User
-from startup_script_utils import load_yaml
-from users.models import Token
-
-users = load_yaml("/opt/netbox/initializers/users.yml")
-if users is None:
-    sys.exit()
-
-for username, user_details in users.items():
-
-    api_token = user_details.pop("api_token", Token.generate_key())
-    password = user_details.pop("password", User.objects.make_random_password())
-
-    user, created = User.objects.get_or_create(username=username, defaults=user_details)
-
-    if created:
-        user.set_password(password)
-        user.save()
-
-        if api_token:
-            Token.objects.get_or_create(user=user, key=api_token)
-
-        print("👤 Created user", username)

startup_scripts/010_groups.py

@@ -1,23 +0,0 @@
-import sys
-
-from startup_script_utils import load_yaml
-from users.models import AdminGroup, AdminUser
-
-groups = load_yaml("/opt/netbox/initializers/groups.yml")
-if groups is None:
-    sys.exit()
-
-for groupname, group_details in groups.items():
-    group, created = AdminGroup.objects.get_or_create(name=groupname)
-
-    if created:
-        print("👥 Created group", groupname)
-
-    for username in group_details.get("users", []):
-        user = AdminUser.objects.get(username=username)
-
-        if user:
-            group.user_set.add(user)
-            print(" 👤 Assigned user %s to group %s" % (username, group.name))
-
-    group.save()

startup_scripts/020_object_permissions.py

@@ -1,68 +0,0 @@
-import sys
-
-from django.contrib.contenttypes.models import ContentType
-from startup_script_utils import load_yaml
-from users.models import AdminGroup, AdminUser, ObjectPermission
-
-object_permissions = load_yaml("/opt/netbox/initializers/object_permissions.yml")
-
-if object_permissions is None:
-    sys.exit()
-
-
-for permission_name, permission_details in object_permissions.items():
-
-    object_permission, created = ObjectPermission.objects.get_or_create(
-        name=permission_name,
-        defaults={
-            "description": permission_details["description"],
-            "enabled": permission_details["enabled"],
-            "actions": permission_details["actions"],
-        },
-    )
-
-    if permission_details.get("object_types", 0):
-        object_types = permission_details["object_types"]
-
-        if object_types == "all":
-            object_permission.object_types.set(ContentType.objects.all())
-
-        else:
-            for app_label, models in object_types.items():
-                if models == "all":
-                    app_models = ContentType.objects.filter(app_label=app_label)
-
-                    for app_model in app_models:
-                        object_permission.object_types.add(app_model.id)
-                else:
-                    # There is
-                    for model in models:
-                        object_permission.object_types.add(
-                            ContentType.objects.get(app_label=app_label, model=model)
-                        )
-
-    print("🔓 Created object permission", object_permission.name)
-
-    if permission_details.get("groups", 0):
-        for groupname in permission_details["groups"]:
-            group = AdminGroup.objects.filter(name=groupname).first()
-
-            if group:
-                object_permission.groups.add(group)
-                print(
-                    " 👥 Assigned group %s object permission of %s"
-                    % (groupname, object_permission.name)
-                )
-
-    if permission_details.get("users", 0):
-        for username in permission_details["users"]:
-            user = AdminUser.objects.filter(username=username).first()
-
-            if user:
-                object_permission.users.add(user)
-                print(
-                    " 👤 Assigned user %s object permission of %s"
-                    % (username, object_permission.name)
-                )
-
-    object_permission.save()

startup_scripts/030_custom_fields.py

@@ -1,67 +0,0 @@
-import sys
-
-from extras.models import CustomField
-from startup_script_utils import load_yaml
-
-
-def get_class_for_class_path(class_path):
-    import importlib
-
-    from django.contrib.contenttypes.models import ContentType
-
-    module_name, class_name = class_path.rsplit(".", 1)
-    module = importlib.import_module(module_name)
-    clazz = getattr(module, class_name)
-    return ContentType.objects.get_for_model(clazz)
-
-
-customfields = load_yaml("/opt/netbox/initializers/custom_fields.yml")
-
-if customfields is None:
-    sys.exit()
-
-for cf_name, cf_details in customfields.items():
-    custom_field, created = CustomField.objects.get_or_create(name=cf_name)
-
-    if created:
-        if cf_details.get("default", False):
-            custom_field.default = cf_details["default"]
-
-        if cf_details.get("description", False):
-            custom_field.description = cf_details["description"]
-
-        if cf_details.get("label", False):
-            custom_field.label = cf_details["label"]
-
-        for object_type in cf_details.get("on_objects", []):
-            custom_field.content_types.add(get_class_for_class_path(object_type))
-
-        if cf_details.get("required", False):
-            custom_field.required = cf_details["required"]
-
-        if cf_details.get("type", False):
-            custom_field.type = cf_details["type"]
-
-        if cf_details.get("filter_logic", False):
-            custom_field.filter_logic = cf_details["filter_logic"]
-
-        if cf_details.get("weight", -1) >= 0:
-            custom_field.weight = cf_details["weight"]
-
-        if cf_details.get("choices", False):
-            custom_field.choices = []
-
-            for choice_detail in cf_details.get("choices", []):
-                if isinstance(choice_detail, dict) and "value" in choice_detail:
-                    # legacy mode
-                    print(
-                        f"⚠️ Please migrate the choice '{choice_detail['value']}' of '{cf_name}'"
-                        + " to the new format, as 'weight' is no longer supported!"
-                    )
-                    custom_field.choices.append(choice_detail["value"])
-                else:
-                    custom_field.choices.append(choice_detail)
-
-        custom_field.save()
-
-        print("🔧 Created custom field", cf_name)

startup_scripts/040_custom_links.py

@@ -1,35 +0,0 @@
-import sys
-
-from django.contrib.contenttypes.models import ContentType
-from extras.models import CustomLink
-from startup_script_utils import load_yaml, split_params
-
-custom_links = load_yaml("/opt/netbox/initializers/custom_links.yml")
-
-if custom_links is None:
-    sys.exit()
-
-
-def get_content_type_id(content_type):
-    try:
-        return ContentType.objects.get(model=content_type).id
-    except ContentType.DoesNotExist:
-        pass
-
-
-for link in custom_links:
-    content_type = link.pop("content_type")
-    link["content_type_id"] = get_content_type_id(content_type)
-    if link["content_type_id"] is None:
-        print(
-            "⚠️ Unable to create Custom Link '{0}': The content_type '{1}' is unknown".format(
-                link.get("name"), content_type
-            )
-        )
-        continue
-
-    matching_params, defaults = split_params(link)
-    custom_link, created = CustomLink.objects.get_or_create(**matching_params, defaults=defaults)
-
-    if created:
-        print("🔗 Created Custom Link '{0}'".format(custom_link.name))

startup_scripts/050_tags.py

@@ -1,24 +0,0 @@
-import sys
-
-from extras.models import Tag
-from startup_script_utils import load_yaml, split_params
-from utilities.choices import ColorChoices
-
-tags = load_yaml("/opt/netbox/initializers/tags.yml")
-
-if tags is None:
-    sys.exit()
-
-for params in tags:
-    if "color" in params:
-        color = params.pop("color")
-
-        for color_tpl in ColorChoices:
-            if color in color_tpl:
-                params["color"] = color_tpl[0]
-
-    matching_params, defaults = split_params(params)
-    tag, created = Tag.objects.get_or_create(**matching_params, defaults=defaults)
-
-    if created:
-        print("🎨 Created Tag", tag.name)

startup_scripts/060_webhooks.py

@@ -1,36 +0,0 @@
-import sys
-
-from django.contrib.contenttypes.models import ContentType
-from extras.models import Webhook
-from startup_script_utils import load_yaml, split_params
-
-webhooks = load_yaml("/opt/netbox/initializers/webhooks.yml")
-
-if webhooks is None:
-    sys.exit()
-
-
-def get_content_type_id(hook_name, content_type):
-    try:
-        return ContentType.objects.get(model=content_type).id
-    except ContentType.DoesNotExist as ex:
-        print("⚠️ Webhook '{0}': The object_type '{1}' is unknown.".format(hook_name, content_type))
-        raise ex
-
-
-for hook in webhooks:
-    obj_types = hook.pop("object_types")
-
-    try:
-        obj_type_ids = [get_content_type_id(hook["name"], obj) for obj in obj_types]
-    except ContentType.DoesNotExist:
-        continue
-
-    matching_params, defaults = split_params(hook)
-    webhook, created = Webhook.objects.get_or_create(**matching_params, defaults=defaults)
-
-    if created:
-        webhook.content_types.set(obj_type_ids)
-        webhook.save()
-
-        print("🪝 Created Webhook {0}".format(webhook.name))

startup_scripts/070_tenant_groups.py

@@ -1,16 +0,0 @@
-import sys
-
-from startup_script_utils import load_yaml, split_params
-from tenancy.models import TenantGroup
-
-tenant_groups = load_yaml("/opt/netbox/initializers/tenant_groups.yml")
-
-if tenant_groups is None:
-    sys.exit()
-
-for params in tenant_groups:
-    matching_params, defaults = split_params(params)
-    tenant_group, created = TenantGroup.objects.get_or_create(**matching_params, defaults=defaults)
-
-    if created:
-        print("🔳 Created Tenant Group", tenant_group.name)

startup_scripts/080_tenants.py

@@ -1,34 +0,0 @@
-import sys
-
-from startup_script_utils import (
-    load_yaml,
-    pop_custom_fields,
-    set_custom_fields_values,
-    split_params,
-)
-from tenancy.models import Tenant, TenantGroup
-
-tenants = load_yaml("/opt/netbox/initializers/tenants.yml")
-
-if tenants is None:
-    sys.exit()
-
-optional_assocs = {"group": (TenantGroup, "name")}
-
-for params in tenants:
-    custom_field_data = pop_custom_fields(params)
-
-    for assoc, details in optional_assocs.items():
-        if assoc in params:
-            model, field = details
-            query = {field: params.pop(assoc)}
-
-            params[assoc] = model.objects.get(**query)
-
-    matching_params, defaults = split_params(params)
-    tenant, created = Tenant.objects.get_or_create(**matching_params, defaults=defaults)
-
-    if created:
-        print("👩‍💻 Created Tenant", tenant.name)
-
-    set_custom_fields_values(tenant, custom_field_data)

startup_scripts/090_regions.py

@@ -1,26 +0,0 @@
-import sys
-
-from dcim.models import Region
-from startup_script_utils import load_yaml, split_params
-
-regions = load_yaml("/opt/netbox/initializers/regions.yml")
-
-if regions is None:
-    sys.exit()
-
-optional_assocs = {"parent": (Region, "name")}
-
-for params in regions:
-
-    for assoc, details in optional_assocs.items():
-        if assoc in params:
-            model, field = details
-            query = {field: params.pop(assoc)}
-
-            params[assoc] = model.objects.get(**query)
-
-    matching_params, defaults = split_params(params)
-    region, created = Region.objects.get_or_create(**matching_params, defaults=defaults)
-
-    if created:
-        print("🌐 Created region", region.name)

startup_scripts/110_sites.py

@@ -1,35 +0,0 @@
-import sys
-
-from dcim.models import Region, Site
-from startup_script_utils import (
-    load_yaml,
-    pop_custom_fields,
-    set_custom_fields_values,
-    split_params,
-)
-from tenancy.models import Tenant
-
-sites = load_yaml("/opt/netbox/initializers/sites.yml")
-
-if sites is None:
-    sys.exit()
-
-optional_assocs = {"region": (Region, "name"), "tenant": (Tenant, "name")}
-
-for params in sites:
-    custom_field_data = pop_custom_fields(params)
-
-    for assoc, details in optional_assocs.items():
-        if assoc in params:
-            model, field = details
-            query = {field: params.pop(assoc)}
-
-            params[assoc] = model.objects.get(**query)
-
-    matching_params, defaults = split_params(params)
-    site, created = Site.objects.get_or_create(**matching_params, defaults=defaults)
-
-    if created:
-        print("📍 Created site", site.name)
-
-    set_custom_fields_values(site, custom_field_data)

startup_scripts/120_locations.py

@@ -1,25 +0,0 @@
-import sys
-
-from dcim.models import Location, Site
-from startup_script_utils import load_yaml, split_params
-
-rack_groups = load_yaml("/opt/netbox/initializers/locations.yml")
-
-if rack_groups is None:
-    sys.exit()
-
-match_params = ["name", "slug", "site"]
-required_assocs = {"site": (Site, "name")}
-
-for params in rack_groups:
-
-    for assoc, details in required_assocs.items():
-        model, field = details
-        query = {field: params.pop(assoc)}
-        params[assoc] = model.objects.get(**query)
-
-    matching_params, defaults = split_params(params, match_params)
-    location, created = Location.objects.get_or_create(**matching_params, defaults=defaults)
-
-    if created:
-        print("🎨 Created location", location.name)

startup_scripts/130_rack_roles.py

@@ -1,24 +0,0 @@
-import sys
-
-from dcim.models import RackRole
-from startup_script_utils import load_yaml, split_params
-from utilities.choices import ColorChoices
-
-rack_roles = load_yaml("/opt/netbox/initializers/rack_roles.yml")
-
-if rack_roles is None:
-    sys.exit()
-
-for params in rack_roles:
-    if "color" in params:
-        color = params.pop("color")
-
-        for color_tpl in ColorChoices:
-            if color in color_tpl:
-                params["color"] = color_tpl[0]
-
-    matching_params, defaults = split_params(params)
-    rack_role, created = RackRole.objects.get_or_create(**matching_params, defaults=defaults)
-
-    if created:
-        print("🎨 Created rack role", rack_role.name)

startup_scripts/140_racks.py

@@ -1,47 +0,0 @@
-import sys
-
-from dcim.models import Location, Rack, RackRole, Site
-from startup_script_utils import (
-    load_yaml,
-    pop_custom_fields,
-    set_custom_fields_values,
-    split_params,
-)
-from tenancy.models import Tenant
-
-racks = load_yaml("/opt/netbox/initializers/racks.yml")
-
-if racks is None:
-    sys.exit()
-
-match_params = ["name", "site"]
-required_assocs = {"site": (Site, "name")}
-optional_assocs = {
-    "role": (RackRole, "name"),
-    "tenant": (Tenant, "name"),
-    "location": (Location, "name"),
-}
-
-for params in racks:
-    custom_field_data = pop_custom_fields(params)
-
-    for assoc, details in required_assocs.items():
-        model, field = details
-        query = {field: params.pop(assoc)}
-
-        params[assoc] = model.objects.get(**query)
-
-    for assoc, details in optional_assocs.items():
-        if assoc in params:
-            model, field = details
-            query = {field: params.pop(assoc)}
-
-            params[assoc] = model.objects.get(**query)
-
-    matching_params, defaults = split_params(params, match_params)
-    rack, created = Rack.objects.get_or_create(**matching_params, defaults=defaults)
-
-    if created:
-        print("🔳 Created rack", rack.site, rack.name)
-
-    set_custom_fields_values(rack, custom_field_data)

startup_scripts/150_power_panels.py

@@ -1,42 +0,0 @@
-import sys
-
-from dcim.models import Location, PowerPanel, Site
-from startup_script_utils import (
-    load_yaml,
-    pop_custom_fields,
-    set_custom_fields_values,
-    split_params,
-)
-
-power_panels = load_yaml("/opt/netbox/initializers/power_panels.yml")
-
-if power_panels is None:
-    sys.exit()
-
-match_params = ["name", "site"]
-required_assocs = {"site": (Site, "name")}
-optional_assocs = {"location": (Location, "name")}
-
-for params in power_panels:
-    custom_field_data = pop_custom_fields(params)
-
-    for assoc, details in required_assocs.items():
-        model, field = details
-        query = {field: params.pop(assoc)}
-
-        params[assoc] = model.objects.get(**query)
-
-    for assoc, details in optional_assocs.items():
-        if assoc in params:
-            model, field = details
-            query = {field: params.pop(assoc)}
-
-            params[assoc] = model.objects.get(**query)
-
-    matching_params, defaults = split_params(params, match_params)
-    power_panel, created = PowerPanel.objects.get_or_create(**matching_params, defaults=defaults)
-
-    if created:
-        print("⚡ Created Power Panel", power_panel.site, power_panel.name)
-
-    set_custom_fields_values(power_panel, custom_field_data)